AES Electrostatic Wand Spray Coverage

The Dramm AES Electrostatic Spray Wand improves hydraulic spray coverage by adding an electrostatic charge to the droplets.

L-5 Extension Spray Lance

The L-5 Lance offers a fine spray with 5 conical jet nozzles. The lance extends from 28 to 41 inches.

L-5 Extension Spray Lance

The L-5 Lance offers a fine spray with 5 conical jet nozzles. The lance extends from 28 to 41 inches.

L-5 Extension Spray Lance

The L-5 Lance offers a fine spray with 5 conical jet nozzles. The lance extends from 28 to 41 inches.

Replacing a clogged dripper

Despite good filtration and planning, drippers sometimes clog. When they do, they are easy to replace. However, doing so incorrectly can cause other problems. This video shows the right way to replace a dripper.

Fixing a leak in PE tubing around a dripper

Sometimes a bad punch, bad punch blade or even time and wear can cause the connection between the dripper barb and the PE to leak. This video shows several techniques for fixing these leaks.

Dramm Drip Irrigation Installation Tools

Dramm includes several useful tools to help install your drip irrigaiton system. This video describes how to get the most out of them.

Dramm Drip Irrigation System Installation Guide

Dramm Drip Irrigation Systems are easy to install and maintain. This video details how-to install tips and maintenance techniques.

TurboULV Hybrid - Spray-Fog

The TurboULV Hybrid offers the ability to spray or fog for surface disinfection or space fumigation. Precise nozzles allow for a predictable result.

TurboULV Hybrid - Spray-Fog

The TurboULV Hybrid offers the ability to spray or fog for surface disinfection or space fumigation. Precise nozzles allow for a predictable result.

TurboULV Hybrid - Spray-Fog

The TurboULV Hybrid offers the ability to spray or fog for surface disinfection or space fumigation. Precise nozzles allow for a predictable result.

PulsFOG disinfection of manufacturing facility

The Dramm PulsFOG K-10 shown disinfecting a manufacturing facility. The 15-20µ droplets disperse quickly, getting between boxes, reaching into shelves and in tight spaces.

FM20 Foaming Uptake

Dramm's FM20 System connects to your existing air compressor to create a rich, thick foam that persists. Better foam means more contact time for disinfection. Video shows application of Uptake disinfectant.

FM20-25 How-to Video

The Dramm FM20-25 Foamer connects to your existing compressor to create a rich, thick foam that persists.

FOAM8L Cleaning Algae

The FOAM8L sprays a foam that sticks to vertical surfaces. This video shows the unit in use with BioSafe's ZeroTol at a 1:50 rate and BioFoam cleaning algae on a polycarbonate wall in the greenhouse.

CFAR Coldfogger disinfecting a school bus

The Coldfogger provides a fast, direct fog with droplets in the 40µ-60µ range. The fog coats surfaces and diffuses to fill the space. Do not use with heavy oxidizers. These will wear certain components more quickly than with normal use.

PulsFOG disinfecting a Dairy Barn

The Dramm PulsFOG is perfect for applying disinfectants as the fog fills the space quickly, reaching everywhere.

Disinfection - thermal fogging of poultry barn

The Dramm PulsFOG rapidly applies disinfectants to a barn during cleanout. As a last step in the sanitation process, the thick fog fills the space, getting places washing does not.

Sanitize your trays with foam.

Foam persists, increasing contact time for a variety of disinfectants.

Foaming Greenhouse Benches

Clean and sanitize your greenhouse benches and concrete with the Dramm FM Series Foamers. Choose from a variety of chemicals, some requiring foaming agents, some not, to disinfect your faciity. Foam

HANS Model 2 & 2R Stage 1&2 Filtration Replacement Procedure

Stage 1&2 filter (sediment/carbon) replacement procedure for Model 2 & 2R.

HANS Model 2 & 2R Sanitation Procedure

HANS Model 2R RO Element Replacement

Replacing the RO Element is easy with minimal tools and space required.

HANS Model 2 RO Element Replacement

HANS Model 2 QUAD RO

The HANS Quad RO Unit Reverse Osmosis Reinvented. The next step in water treatment evolution is here. Perfect for clean water sustainability. Reduce water usage and waste bills. Scale to meet any clean water demand.

MiniSigma Filter Troubleshooting

Dramm systems sometimes include the Amiad MiniSigma Filter. This video describes troubleshooting and maintenance.

Checking Pump Rotation

When installing your pumps, pump rotation is important to confirm. Electrical installation can change this rotation.

Calibrating IFM Flow Meter on DRAMMwater Ozone Skid

Setting the calibration on the IFM sensor on your ozone skid helps protect the pump and other components from damage due to low flow situations. This video details this calibration.

Buwatec Liner Connection Installation

DRAMMwater installations often include corrugated water tanks from Buwatec. These tanks are assembled on site, and have liners to hold the water. The connection to plumbing is done using a boot or witches' hat connection built into the liner at the design

Filtration Basics Presentation

DRAMMwater's Al Zylstra covers filtration basics in a presentation from the Water Quality Education Alliance webinar series.

Programming The NXT2 Timer on Your DRAMMwater Filter

DRAMMwater uses Marlo's NXT2 Timer to schedule backflushing of your filter vessels. This video covers programming the timer.

Checking Oxygen Purity on Your Oxygen Concentrator

The oxygen concentrator is the lungs of your ozone system. Make sure that the O2 purity is above 90% to keep things running smoothly.

Calibrating Your ORP Probe

Regularly calibrating your ORP probe will ensure that your ozone system is working accurately.

This video discusses calibration and cleaning.

Cleaning Your Ozone Injector

DRAMMwater's Al Zylstra explains how and why you need to clean your ozone injector to keep your system in top shape.

Webinar: Designing Your Irrigation System

Dramm's Kurt Becker discusses the entire irrigation design and flow process in this webinar, the first in a three-part series.

Vinyard Frost Protection with K-30/20 PulsFOG

The PulsFOG rapidly applies a blanket of fog that can help retain heat from the earth to keep plants from freezing.

Frost Protection with K-40 PulsFOG

The K-40 PulsFOG quickly applies a blanket of fog over a crop to keep plants warmer than the surrounding air temperature, helping to prevent frost.

Recalibrating your Dramm Thermostat

The T-41 and T-42 both use an easy to reset dial. This video shows how to recalibrate our thermostats in case they are out of alignment.

Programming the MistTime

The MistTime10 is easy to program. This video highlights setting up both basic and advanced features.

WaterCart In Use

Both the 20 and the 50 gallon WaterCart use our 5 gpm, battery operated pump. On a full charge, the unit should pump approximately 300 gallons before needed to be recharged.

124-GB Handi-Reach Handle

The 124-GB offers a 90û bend for precise watering control.

QAV Shut Off Design

The QAV Shut-Off uses a unique, patent-pending, design to strengthen the components while keeping costs in line.

Brass Hose Swivel

The Brass Hose Swivel makes hand watering much easier by allowing the wand to move independently of the hose.

Hose Swivel in Use

The Dramm Brass Hose Swivel allows hose attachments to move independently of the hose, freeing movement and eliminating kinks.

Cleaning a 350PL Screen Aire Nozzle

The Screen Aire uses internal baffles and screens to aerate the water flow. These screens may become clogged, especially if no in-line filter is used. Cleaning is not difficult.

350PL Working

The 350PL Screen Aire provides a high, aerated flow that won't disturb soil or top-dressed fertilizer.

350PL

The 350PL's aerated flow

Valve Leak Testing

Dramm valves are tested for durabilty against leaking.

Force Testing

Blunt force testing of the Dramm Water Breaker Nozzles.

Drag Testing

Dramm products being tested for dragging durability

Thread Testing

Dramm tests all of our products rigorously. This video shows our plastic threads being tested for durability.

OneTouch HighFlow Valve

The OneTouch HighFlow Valves offers fingertip watering control with up to 16 gpm

DRAMMPress Hose Crimper Operation

The DRAMMPress Hose Crimper is very easy to use. This video demostrates fitting ColorStorm hose.

OneTouch Valve Operation

The One Touch Valve offers one-handed ease of operation.

Commercial Fan Nozzle Working

The Dramm Commercial Fan Nozzle waters rectangularly, softly and evenly.

Dramm PipeLoc Plumbing System

Choose your watering plan and start watering.

Setting Up Your iiri Controller - Step 2

Connect your smartphone App to your iiri controller with one button.

Setting Up Your iiri Controller - Step 1

Set up your irrigation plan on the iiri smartphone App

Watering 2 - Selecting the Right Tool

Dramm's Louis Damm explains the difference between Dramm nozzles offering tips on which nozzles to use for each situation.

Watering 101

Learn the basics of hand watering.

K-22 PulsFOG BIO

K-22 PulsFOG operating in a greenhouse.

PulsFOG Solution System Cleaning

The PulsFOG should be cleaned well after each use. The solution system should be cleaned by running cleaning solution through the solution lines and nozzles using the included cleaning kit and Dramm PFC solution. Remove and triple rinse the solution tank.

How to Run a K-10 PulsFOG

This quick video shows how to start and stop a K-10 PulsFOG.

Operation of K-30/20 BIO PulsFOG

An unscripted video showing a customer instructional session with the K-30/20 BIO PulsFOG.

Cleaning a PulsFOG

Cleaning a portable PulsFOG using PFC Cleaning Solution.

PulsFOG in Large Greenhouse

Running a PulsFOG K-30 in a large, European greenhouse.

PulsFOG K-22 in a hoop house

Video of a K-22 PulsFOG treating a 3000 sq ft greenhouse using only NutriFOG carrier solution.

PulsFOG Creates a True Fog

PulsFOG does not burn or volatilize the chemical solution, it atomizes it, turning it into a true, moisture-based fog.

PulsFOG in a Dairy Barn

Application of disinfectant in a dairy barn with the PulsFOG K-10.

PulsFOG Dual Start System

The Dual Start PulsFOG includes both a manual priming ball and a push-button compressor starting system. Connect to a battery for an easy start. Use the manual ball if no battery is available.

Autofog Instructional Video

An unscripted video showing the use and care of an Autofog.

Autofog in use in a vegetable greenhouse

Video showing several Autofog LVH fogger heads mounted in a vegetable greenhouse, automatically applying pesticide.

Autofog in use in an ornamental greenhouse

Demonstration of the Autofog in an ornamental greenhouse.

TracFOG Chemical Mixing

Proper mixing of the chemical solution in the TracFOG is demonstrated.

K-22 Video Training

Learn how to use the K-22 PulsFOG in this unscripted video teaching growers how to run the machine.

K-50 Basic Operation

The K-50, 275 hp thermal fogger is easy to start and extremely powerful. This video covers the basics of operation

K-50 PulsFOG Starts and Stops Easily

They K-50 PulsFOG uses a unique fuel system that allows for easy stopping and restarting of the machine without having to allow the unit to cool.

RemoteWind Hose Reel

The RemoteWind Hose Reel is demonstrated showing both modes of operation.

Phil's Service Tip of the Day

Phil's Service Tip of the Day

Chemdose Operation

See the Chemdose in operation including how to program.

TracFOG in Peppers

The original TracFOG used to fog greenhouse peppers

Cleaning your New Coldfogger AR

The New Coldfogger AR has the ability to apply some corrosive products unlike previous versions of the Coldfogger. However, proper cleaning is a must to protect your system when using corrosive products.

Coldfogger in Use

The Dramm Coldfogger in use in several greenhouse operations.

BP-4 in Use

The BP-4 Backpack Sprayer is a versatile battery operated sprayer with up to 150 psi. See it in operation.

BP-4Li Operational Video

The BP-4Li offers an easy to swap battery and fully variable pressure up to 150 psi.

BP4 Twin Herbicide Nozzle

The Twin Herbicide Nozzle offers a coarse spray with two directable nozzles for easy, accurate herbicide applications.

TracFOG Automatic Nozzle Reversion

Watch the nozzle reversion system in action, moving the nozzle direction from one side of the unit to the other.

TracFOG in Ornamental Greenhouse

TracFOG applying chemicals in an ornamental greenhouse demonsration.

TracFOG GV in Cucumbers

The TracFOG400GV, greenhouse vegetable model, in use in a greenhouse cucumber crop. The tall booms allow for optimal positioning of the nozzles for application over the top of the crop or towards the rear.

Chemdose 2 Quit Working?

Learn how to clean the flow meter in your Chemdose 2 if it fails.

PulsFOG in Lettuce Crop

View the K-30/20 BIO PulsFOG applying a biological pesticide in a lettuce crop in Germany.

K-40 PulsFOG Operating Procedure

Learn how to operate the K-40 BIO PulsFOG.

Coldfogger Gun Filter

The Dramm Coldfogger has a filter in the gun to protect the small orifice in the nozzle tip. This filter may become clogged with pesticide residue and prevent spray. To prevent this, clean filter after each use.

Priming Coldfogger Pump

If your Dramm Coldfogger Pump will not prime, the intake valve is, most likely stuck. This is easy to free. This video shows how to unstick this valve and prime the Coldfogger.

Coldfogger Operation

An unscripted video showing the basic operation of the Coldfogger.

Autofog Annual Maintenance Kit Installation

To keep your Autofog running properly, Dramm recommends servicing annually with our Annual Maintenance Kit. This kit consists of a number of parts that should be replaced annually. This video shows how to replace the nozzle components.

MLVH Suction Line and Filter Position

To ensure that your MiniAutofog fogs properly and does not clog or stop spraying during application, make sure that the filter on the suction tube is properly positioned. Improper positioning or not using the filter can cause the suction tubeto siphon to

Cleaning a PulsFOG Barrel

Carbon will build up in the barrel of the PulsFOG as a result of the combustion used for propulsion. This carbon will choke the exhaust as it builds up, causing the machine to stop during fogging. To prevent this buildup, brush the barrel after every us

MSO Fine Spray

The MSO Heavy Duty Sprayer at 500 psi at the finest spray setting

Priming MSO Pump

The MSO Pump may fail to prime if the valve body becomes stuck to the inside of the valve body. This can occur when the unit sits idle for a period of time. This can be fixed easily, as seen in this video.

MSO Pressure Knob Guide

The MSO Pressure Regulator Knob includes a guide that can be locked at lower pressures. However, sometimes it may slip down unintentionally, reducing the full pressure range. Thread the knob to the top for full adjustment.

Cleaning your Autofog

Keeping your Autofog clean will help it run well for years. This video shows the basics.

Setting the Autofog Timer

Programing your Autofog timer is easy. After setting the clock to the correct time, and remembering it is set in military time, flip out all the pins for the complete time to be fogged. Each pin represents 15 minutes. Ensure that the switch is in the A

TracFOG Setup

An unscripted video showing the use and care of the TracFOG, PTO driven fogger

Repositioning the TracFOG Nozzles For Rear Fogging

Now the TracFOG nozzle assembly can be turned to the rear to allow for fogging in different directions. This adds flexibility to the unit.

Agitation/Aeration Bucket

Keep chemicals in solution or add oxygen for nematodes and other aerobic microorganisms.

Ferticart 50 Agitation/Aeration System

The FC50-A Ferticart has an on-board, AC powered agitation system that delivers 4 gpm of recirculation to the tank through our unique agitation bar. Aeration is added with the flip of a switch.

Hydra Spray Pattern

The Dramm Hydra Sprayer and the MS40-TG Spray Gun create a fine spray pattern with a forward spray, allowing great coverage at a distance.

Proper Spraying Technique

When spraying, utilize the natural features of your spray gun to achieve better coverage. The Hydra and the MS40-TG create a fine patter with a forward spray. Use the swirling portion of the spray at a distance to get better coverage.

Hydra Agitation

Pattern adjustment is easy with the adjustment lever on the side of the gun.

Hydra Drenching

The Dramm Hydra Sprayer has an output of 4 gpm. With the optional Drench Adaptor (DA-24) the unit can be used to drench various solutions.

Hydra200 Two Tank Option

The Hydra200 offers a second 20 gallon tank as an option. Both tanks can be used as the source for spraying or the Hydra can pump from one into the other allowing for the 20 gallon tank to act as a nurse tank.

Hydra Pump Repair Video

The Dramm Hydra pump is a durable, triple-piston pump. However, over time certain parts will wear and need replacement. This video covers all pump repair for your Hydra pump.

TurboULV in Ornamentals

The TurboULV is a directed, low volume sprayer with a forceful spray with fine droplets that will penetrate the canopy but won't damage plant material.

TurboULV For Disinfection

The TurboULV offers a directed spray or a whole-room fog, perfect for the application of disinfectants and sanitizers.

FOAM8L Compression Foamer on Trays

The Dramm FOAM8L compression foamer works by combining compressed air with a foaming solution to create a rich foam, perfect for disinfection of even vertical surfaces.

FOAM8L on Vertical Surfaces

The Dramm FOAM8L compression foamer works great on vertical surfaces.

FOAM8L on Algae

The Dramm FOAM8L is perfect for cleaning algae on surfaces.

FOAM8L Instructional Video

The FOAM8L is easy-to-use. This video shows how to mix, pump and spray.

FOAM8L Cleaning Algae

The FOAM8L sprays a foam that sticks to vertical surfaces. This video shows the unit in use with BioSafe's ZeroTol at a 1:50 rate and BioFoam cleaning algae on a polycarbonate wall in the greenhouse.

FM20-25 How-to Video

The Dramm FM20-25 Foamer connects to your existing compressor to create a rich, thick foam that persists.

FM20 Foaming Uptake

Dramm's FM20 System connects to your existing air compressor to create a rich, thick foam that persists. Better foam means more contact time for disinfection. Video shows application of Uptake disinfectant.

JetFOG in germination chamber

Dramm's JetFOG nozzle provides small (80 micron) droplets at 50 psi, humidifying easily.

JetFOG cooling in a layer barn

Video of the JetFOG nozzle cooling a poultry layer barn.

JetFOG cooling a hog barn.

Dramm JetFOG cooling a hog barn.

JetFOG Cooling in livestock

Dramm JetFOG nozzles cooling a passively ventilated barn.

JetFOG for humidification in greenhouse

Dramm JetFOG nozzles create an 80µ droplet that can raise humidity or cool a greenhouse.

JetFOG Maintenance Tools

Dramm's JetFOG Maintenance Tools make disassembly of your JetFOG nozzles for replacement parts easy.

JetFOG Maintenance Tools

Dramm's JetFOG Maintenance Tools make disassembly of your JetFOG nozzles for replacement parts easy.

Jetrain For Propagation Mist

Dramm's JetRain Nozzles are perfect for propagation mist. Alternate the Blue and White nozzles for more even coverage.

JetRain Check Valve Cleanout

Debris might get caught in the JetRain Check Valve and cause it to remain open and drip or run. It is easy to clean this check valve. This video details how to clean it quickly.

Pressure Compensated Dribble Ring

Dramm's Pressure Compensated Dribble Ring distributes the water evenly throughout the pot, allowing for larger containers to be watered evenly and easily.

PC Ring T-Piece and Assembly

The PC-Ring T-Piece allows for easy assembly and disassembly of the Dramm PC Rings. The tapered end provides a secure, but not permanent connecton. Only insert until tight. Do not over insert.