400 Aluminum Water Breaker® Nozzle

The original full-flow shower head nozzle. Dramm's aluminum 400 Water Breaker provides fast, full-flow watering without damage to your plants or disturbing soil. Used and recommended daily by professional growers worldwide. Cast aluminum and hand machined with 3/4 inch brass hose threads. Invented, designed and manufactured in the U.S.A. since 1945.

170 Aluminum Water Breaker® Nozzle

The 170AL Water Breaker is excellent for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets), and when using fertilizer syphons. Adjust water flow to 50% of its possible volume. Cast aluminum with 3/4 brass hose threads. Manufactured in the U.S.A.

400PL Water Breaker® Nozzle with Protective Ring

The 400PL With Protective Ring returns to our familiar Blue color but with the additon of our black protective ring. This ring prevents damage by absorbing and transferring blows around the disk.

400PL Water Breaker® Nozzle

The 400PL Water Breaker provides fast, full-flow watering without damage to your plants. Patterned after the original 400 Aluminum water breaker , the 400PL is made from high-impact ABS plastic and aluminum to provide a lightweight alternative. Used by professional growers worldwide. Made in U.S.A. 3/4 hose threads.

170PL Water Breaker® Nozzle

Patterned after the 170 Aluminum water breaker, the 170PL is an excellent choice for watering in areas with low water pressure or with systems which restrict total water volume. It is designed for small containers (hanging baskets). Adjust water flow to 50% of its possible volume. Made in the U.S.A. from ABS plastic. 3/4 hose threads.

480PL Plastic Fine Water Breaker® Nozzle

480 Plastic Water Breaker. Stainless steel disk. Micro-fine holes. Focused Pattern.

480AL Aluminum Fine Water Breaker® Nozzle

480 Aluminum Water Breaker. Stainless steel disk. Micro-fine holes. Wider pattern.

Screen-Aire Water Breaker® Nozzle

The Screen-Aire Water Breaker is designed to water nursery containers with a gentle, concentrated aerated flow of water. A fine-mesh screen and an array of internal components combine air and water to produce a very soft, unrestricted spray. Use a Dramm In-Line Hose Filter to keep the nozzle from clogging. Made in the U.S.A. 3/4 brass threads.

1000PL Water Breaker® Nozzle

The 1000PL Redhead water breaker has over 1,000 micro holes that create an ultra-soft flower shower which will not disturb delicate soil or harm tender plants. Use with a Dramm In-Line Hose Filter to prevent clogging. Made in U.S.A. from ABS plastic and stainless steel.

750PL Fine Low Flow Water Breaker® Nozzle

The 750PL Water Breaker has 750 micro-holes for a fine pattern with a slightly reduced flow rate. The 750PL is perfect for light watering with a very soft pattern. Wider pattern.

175 micron In-Line Hose Filter

The Dramm In-Line Hose Filter is for use with any Dramm hose nozzle, but highly recommended for the 1000PL Water Breaker and the 350AL Screen Aire. A stainless steel 175 micron (80 mesh) screen filters out unwanted dirt and debris.

In-Line Wand Filter Element

175 micron element for the ILF-175.

Brass Hose Swivel

The Brass Hose Swivel is a live swivel that allows for unencumbered movement between the hose and attachements under pressure. Reduces hose twisting.

Brass Rose - 4 Diameter

Our Brass Rose features an extra wide spray pattern, which allows you to increase the speed of hand watering. Available in a 4-inch diameter. Great for watering bedding plants, pots or market packs. 540B includes protective rubber guard and metric to inch hose thread converter. Made in Germany with 3/4 hose threads.

Plastic Fan Nozzle

The Dramm Plastic Fan Nozzle offers a medium flow in a rectangular pattern. Perfect for flats and plug trays.

Seedling Nozzle

The Seedling Nozzle allows you to water fragile plants, delicate seedlings or plant cuttings. This high-quality nozzle produces an extra fine, hollow cone mist pattern and sprays 1/2 gallon of water per minute. Made in the U.S.A. from solid brass. 3/4 hose threads.

Fogg-It Nozzle - Super Super Fine

The Fogg-It Nozzle is designed for misting delicate seedlings or for raising humidity around wilting plants. This nozzle has three mist jets which create a conical spray pattern. Available in 4 different discharge rates. Made in the U.S.A. from solid brass. 3/4 hose threads. Available in 4 different flow rate sizes.

Fogg-It Nozzle - Super Fine

Adjustable Hose Nozzle

Our Adjustable Hose Nozzle is great for cleaning walkways, benches, equipment... just about anything! Twist the barrel to adjust the water pattern from a fine, cone-shaped spray to a powerful stream. Twist the barrel back and the water is off. Manufactured in the U.S.A. from brass. 3/4 hose threads.

Syphonject™

Syphonject - plastic siphon mixer. Our 20:1 ratio feeder syphons solution using a pressure drop created by the passing stream of water. The Syphonject is made from glass filled polypropylene and is very durable as well as corrosion resistant. An external check valve ensures that water does not fill the solution source and is easy to replace. The Syphonject is perfect for fertilizing and cleaning.

Handi-Grip™ Handle

The Handi-Grip Handle provides comfort when watering directly from your hose. It is also perfect for using with the Brass Rose or any of the Dramm Water Breakers. The six inch long grip is encased in a padded foam grip. Made in the U.S.A. from aluminum and brass. 3/4 male and female hose threads.

Handi-Reach™ Handle

Handi-Reach Handles are designed to eliminate the stretching and stooping associated with hand watering. Available in 16, 24, 30, 36, 48, 60 and 72-inch lengths, these rugged tools allow you to water hard-to-reach areas with ease. Made in the U.S.A. from extruded aluminum tubing, forged brass hose couplings and a comfort EPDM hand grip. 3/4 male and female hose threads.

36 Hanging Basket Handle

Hanging Basket Handles offer a 90_ curve in the top of handle so you can water directly into a hanging basket. Available in 36 and 48-inch lengths, Use with any 170 series Water Breaker to water hanging baskets and window boxes. Made in the U.S.A. from extruded aluminum tubing, forged brass hose couplings and a comfort EPDM hand grip. 3/4 male & female hose threads.

48 Hanging Basket Handle

Handi-Reach™ Color Handle

Upgrade to our colorized Handi-Reach Handles. These are the same heavy-duty extension handles as noted above, except they have a super comfortable foam hand grip and come in the color of your choice. Six bright colors are available in 16, 24 or 30-inch lengths. Choose from Red (RD), Orange (OR), Yellow (YL), Green (GN), Blue (BL) or Berry (BY)

24 Handi-Reach™ Handle

Hose Protector

The Hose Protector saves hose ends from unnecessary stress and strain. Utilizing a spring wound around a short length of hose, the Hose Protector connects between the faucet and your hose to prevent hose-end kinking and damage to hose couplings. This handy tool is made from zinc plated steel and heavy-duty, nickel plated brass. The Hose Protector has a 5/8 inch inside diameter. 3/4 inch male & female hose threads.

Hose Extender

The Hose Extender is a flexible 24 extension of your hose which can be used with any Dramm water tool. Great for hand watering! Just place our Brass Shut-Off on one end and a 400 Water Breaker on the other. Made in the U.S.A. from reinforced synthetic rubber and heavy-duty brass 3/4 connections. 5/8 inside diameter.

Brass Twisty Quick 5/8

The 625 and 675 Twisty Quick are 1/4 turn quick disconnects with hose barb fittings for use with blunt cut hoses. Secure hose to the fitting with a hose clamp (not provided). Can be used in any combination with 775M and 775F Twisty Quick. Made in Germany from forged brass. Order item 625 for 5/8 ID hose or item 675 for 3/4 ID hose.

Brass Twisty Quick 3/4

Threaded Brass Twisty Quick - Male

The 775M & 775F Twisty Quick are 1/4 turn Quick Disconnects. Makes any threaded hose connection easy to couple/uncouple. Can be used in any combination with 625 & 675 Twisty Quick. Made in Germany from forged brass. 775M - 3/4 male hose thread, 775F - 3/4 female hose thread.

Threaded Brass Twisty Quick - Female

Twisty Quick

Twisty Quick-- plastic quick connect hose adapter. Full water flow design. Our patended design is made from heavy-duty plastic. 3/4 male and female hose threads. Sold as a pair only.

Brass Quick Disconnect

The 740 Brass quick connects offer full flow without water-stop. Made in the USA.

QAV Shut-Off Valve

The QAV Valve is designed as a high-quality, lower-cost valve. Made in the USA, the QAV uses a unique, patent-pending design to improve strengh and quality while reducing assembly labor.

Twin Shut-Off Valve

Water two places at one time with the 235 Twin Shut-Off Valve! Connect the valve to your faucet to create two male connections-- with each connection independently controlled. A quarter turn of the handle and the water flow is shut off. Molded from high quality ABS plastic. 3/4 male and female hose threads.

Brass Twin Shut-Off Valve

Water two places at one time with the 235 Brass Twin Shut-Off Valve! Connect the valve to your faucet to create two male connections-- with each connection independently controlled. A quarter turn of the handle and the water flow is shut off. Cast brass with a female swivel for easy attachment.

Heavy Duty Plastic Shut-Off Valve

The 74 Shut-off valve is made from glass fille polypropylene to be very durable and corrosion resistant. More durable than other plastic valves, the 74 is lightweight and offers a full flow.

300 Brass Shut-Off Valve

Simply the best shut-off valve available. Dramm's #300 Brass Shut-Off Valve provides fingertip water control at the end of your greenhouse hose. A quarter turn of the large ergonomic handle and the water is off. Full water flow design. Made in the USA from brass, durable seals and a hard chrome plated ball to provide years of service. 3/4 threads.

300 Brass Shut-Off Valve w Raised Handle

Our durable Brass Shut Off but with a raised handle so that it can clear obstructions such as the brass Twisty Quick

300 Handle Repair Kit

The Handle repair kit replaces the forged handle and includes the valve stem, nyloc nut and stem washer.

300 Full Repair Kit

The Full repair kit replaces all internal components and the handle.

Aluminum Shut-Off Valve

The 300AL is exactly the same as the 300 Brass, but made from machined aluminum. Lighter weight that its cousin, it is just as durable. Depending on water quality and other fittings used, corrosion may result.

Touch N' Flow Pro™

The 65 Touch N'Flow Pro Trigger Valve offers durability and high flow in a trigger valve. With 11 gpm output and a long life, the 65 TNF Pro allows for flexibility when watering.

Blue Universal Washer

Our Blue Universal Washers are a durable replacement washer for any hose fitting. Replace your washer anytime a hose-end connection starts to leak. Each bag contains 100 washers.

2 Liter Watering Can

The unique spout design and excellent balance make this watering can perfect for indoor use. Houseplant watering is easy with the far reaching spout. Two liter (1/2 gallon) capacity. Complete with a detachable plastic rose. Made from high-grade, durable plastic in red, yellow, green, and blue. Made in USA.

5 Liter Watering Can

Our 5 liter watering can features an extra long spout with a brass rose. The rain-like water pattern arches upward and softly falls upon plants. This gentle sprinkle is unequaled for applying fertilizer to foliage. Detachable brass rose included. Available in red, yellow, green, and blue. 1 1/3 gallon capacity. Made in USA.

7 Liter Watering Can

Designed for and used by professional growers for over 100 years. Now manufactured from 1/8 injection molded plastic so they won't rust, leak or corrode. Available in red, yellow, green, and blue. Perfectly balanced for indoor and outdoor use. Comes standard with large plastic rose. 1 3/4 gallon capacity.

10 Liter Watering Can

Our largest watering can holds over 2 gallons and is engineered for years of use. A detachable angle spout ensures that your plants receive water where you want it. Perfect for Interior Plantscape professionals. Roses sold seperately. Available in red and green. 2 1/2 gallon capacity. Made in Switzerland

2 Liter Replacement Rose

Replacement roses and elbows for Dramm Watering Cans. Specify color code when ordering: Red (RD), Yellow (YL), Green (GN), Blue (BL)

5 Liter Replacement Rose

Pin-Perfect Nozzle

The perfect overhead watering nozzle for foliage plants, bedding plants, geraniums and all 4 to 6 pot crops. Pin-Perfect Nozzles can be easily turned ÙÙoffÙ_ by pushing the pin down and ÙÙonÙ_ again by pulling the pin up. Each nozzle produces a 10 foot diameter spray pattern when your water pipeline is 5 feet above the crop.

Pin-Perfect Nozzles should be installed on the topside of the pipeline or on top of 1/2 PVC risers. For uniform coverage, Pin-Perfect Nozzles should be spaced so that their spray patterns overlap. With the pipeline at 5 feet over the crop your Pin-Perfect Nozzles will produce a 10 foot diameter spray pattern. Space each nozzle 5 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 10 feet apart for complete coverage. To decrease the spray diameter of the Pin-Perfect to 7 feet, lower the water pipeline to 3 feet over the crop and space the nozzles at 3 1/2 foot intervals.

To compensate for pressure loss and ensures uniform water distribution, simply change the color coded nozzle to the nozzle with the next higher output rate. This changing of nozzles will compensate for pressure loss and produce approximately the same amount of output all the way down the pipeline. As a rule of thumb, we recommend changing color coded nozzles every (6th) sixth nozzle.

Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first.

Use Pin-Perfect Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.

Pin-Perfect Nozzle

Pin-Perfect Nozzle Replacement Pin

Replacement pin for the Pin-Perfect Nozzle. The color of the pin designates the nozzle output rate. Replace pins with the same color as the original pin color. The diameter of the orifice in the black body of the Pin-Perfect Nozzle determines the flow rate for that nozzle. All pins have the same diameter and do not affect flow rate. Specify two letter color code when ordering.

180_ Pin-Perfect Nozzle Pin

The Dramm 180_ Pin replaces any color pin on the Pin Perfect Nozzles. This allows for a 180_ pattern without changing nozzles. As the flow rate for the Pin Perfect Nozzle is controlled by the diameter of the nozzle body. The 180_ Pin offers a 180_ pattern without changing the flow. Color: black.

360_ Nifty Nozzles

Dramm 360_ Nifty Nozzles offer an economical solution for simple ÙÙoverheadÙ_ or ÙÙon the benchÙ_ watering systems. These ÙÙniftyÙ_ nozzles produce a 10 foot diameter spray pattern when your water pipeline is 5 feet above the crop. Nifty Nozzles can be installed on the topside of the pipeline, on bottom side of the pipeline or on top of 1/2 PVC risers. Bottom side installations require No-Drip Check Valves to prevent drip.

To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Nifty Nozzles will produce a 10 foot diameter spray pattern. Space each nozzle 5 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 10 feet apart for complete coverage. To decrease the spray diameter of the Nifty Nozzle to 7 feet, lower the water pipeline to 3 feet over the crop and space the nozzles at 3 1/2 foot intervals. Multiple pipelines should be spaced 7 feet apart for complete coverage.

For ÙÙon-the-benchÙ_ watering (for cut flower crops), we recommend using lower flow rate Brown, Green or Grey Nifty Nozzles spaced 3 feet apart, one pipeline down the center of each bench or bed.

Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first.

Use 360_ Nifty Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.

360_ Nifty Nozzles

Assembly Insert

An Assembly Insert is a threaded gasket that provides a quick installation and leak-free seal for Dramm Irrigation Nozzles. The interior female thread is 3/8 Witworth_ the same thread specification used on the Pin-Perfect, Nifty, Misty Mist and Drop style nozzles.

To Install, use a 7/16 drill bit to drill holes into schedule 40 PVC pipe, aluminum pipe or galvanized pipe. Caution: Do not use schedule 80 PVC. The Assembly Insert will not be able to create an effective seal due to the wall thickness of the schedule 80 PVC pipe.

Install the Assembly Insert into the hole and then screw in the nozzle. The width of the nozzle expands the Assembly Insert as it is screwed into place_ creating a leak-free seal without having to drill and tap every hole. Pipes should be clamped and drilled using a drill press or alignment jig to ensure perfectly round holes and straight alignment. Recommended for use at operating pressures up to 50 PSI.

Misty Mist Nozzle

Dramm 360_ Misty Mist Nozzles are for overhead mist propagation, irrigating plugs or raising humidity levels. Misty Mist Nozzles produce a 6 foot diameter spray pattern when your water pipeline is 5 feet above the crop.

Misty Mist Nozzles can be installed on the topside of the pipeline, on bottom side of the pipeline or on top of 1/2 PVC risers. Bottom side installations require No-Drip Check Valves to prevent drip.

To provide uniform coverage in overhead mist propagation or plug irrigation, the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Misty Mist Nozzles will produce a 6 foot diameter spray pattern. Space each nozzle 3 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 6 feet apart for complete coverage. To decrease the spray diameter of the Misty Mist to 5 feet, lower the water pipeline to 3 feet over the crop and space the nozzles at 2 1/2 foot intervals. Multiple pipelines should be spaced 5 feet apart for complete coverage.

For raising humidity levels or mist cooling, use Blue/White Misty Mist Nozzles. It is recommended that you automate the system using short ÙÙonÙ_ cycle times due the relatively high output rate of the nozzle. The pipeline should be suspended as high as possible in the middle of each bay without interfering with the spray pattern. Space nozzles 6 feet apart. There is no need to worry about overlapping spray patterns since the goal is to evaporate water into the air versus allowing the water to drop to the soil.

Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first.

Use 360_ Misty Mist Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.

Misty Mist Nozzle

High Pressure Misty Mist Nozzle

The High Pressure Misty Mist delivers an ultra fine spray_ ideal for mist cooling and raising humidity levels. These nozzles create a 10 foot diameter spray pattern.

High Pressure Misty Mist Nozzles should only be installed on the topside of the pipeline. Bottom side installations are not recommended due to the high pressures involved.

Space nozzles 10 feet apart with the pipeline suspended as high as possible in the middle of each bay_ without interfering with the spray pattern of the nozzle. There is no need to worry about overlapping spray patterns since the goal is to evaporate water into the air versus allowing the water to drop to the soil.

Please note that high pressure pumps and filtration equipment are required for these nozzles to work properly. High Pressure Misty Mist Nozzles can not be installed using Assembly Inserts. Threads must be tapped directly into the water pipeline_ use the drill & tap installation method explained at the end of this section.

Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first.

Use High Pressure 360_ Misty Mist Nozzles in combination with Dramm Run-Out Valves to control water drip.

Drop Inversion Nozzle

Due to a special spinning mechanism which increases the spray diameter of the Drop Inversion Nozzle_ it is perfect for 24 foot wide quonset/ tunnel houses. It is used on overhead watering systems that require a larger droplet size or an extended coverage area from each nozzle. Drop Inversion Nozzles produce a 360_ 24 foot diameter spray pattern and must be installed on the bottom side of the pipeline with No-Drip Extension Check Valves.

To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Drop Inversion Nozzles produce a 24 foot diameter spray pattern. Space each nozzle 12 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 24 feet apart for complete coverage. To decrease the spray diameter, lower the water pipeline until the desired spray diameter is achieved.

Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first.

Use Drop Inversion Nozzles in combination with Dramm Run-Out Valves and No-Drip Extension Check Valves to control water drip.

Drop Upright Nozzle

The Drop Upright Nozzle has a unique spinning mechanism which increases the spray diameter of this nozzle to 30 feet when your water pipeline is 5 feet above the crop. It is used on overhead watering systems that require a larger droplet size or an extended coverage area from each nozzle. Drop Upright Nozzles produce a 360_ 36 foot diameter spray pattern and must be installed on the topside of the pipeline or on top of 1/2 PVC risers.

To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop, Drop Upright Nozzles produce a 30 foot diameter spray pattern. Space each nozzle 15 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 30 feet apart for complete coverage. To decrease the spray diameter, lower the water pipeline until the desired spray diameter is achieved.

Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first.

Use Drop Upright Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.

T-Drop Nozzle

The T-Drop Nozzle was created for long narrow installations in which an elliptical spray pattern is desired. T-Drop Nozzles can be installed on the topside of the pipeline, on bottom side of the pipeline or on top of 1/2 PVC risers. Bottom side installations require No-Drip Check Valves to prevent drip.

To provide uniform coverage the nozzles should be spaced so that their spray patterns overlap. With the pipeline 5 feet over your crop and nozzles installed on the topside of your pipeline, T-Drop Nozzles will produce a 10 foot by 5 foot elliptical spray pattern. Space each nozzle 5 feet apart so the spray pattern will overlap to the next nozzle. Multiple pipelines should be spaced 5 feet apart for complete coverage. To increase the spray diameter of the T-Drop to 12 feet by 6 feet, install the nozzles on the bottom side of the pipeline and space the nozzles at 6 foot intervals. Multiple pipelines should be spaced 6 feet apart for complete coverage.

Before you begin an installation, we recommend that you install one pipeline based on the guidelines presented. After the first pipeline is installed, tested and adjusted, remaining lines can be set-up following the same specifications as the first.

Use T-Drop Nozzles in combination with Dramm Run-Out Valves, No-Drip Risers and No-Drip Extension Check Valves to control water drip.

Nozzle Plug

Oops! Did you drill one too many holes? Use the Dramm Nozzle Plug to cap off unwanted holes without replacing entire pipelines. Install as you would any other Dramm Nozzle or unscrew the unwanted Pin-Perfect, Nifty or Misty Mist Nozzle and simply replace it with the Nozzle Plug. Order a few extra_ we won't tell. Item Number: PLUG

36 Pin-Perfect Hanging Nozzle Assembly

The Dramm Hanging Nozzle system combines the superior flow rates and water patterns of Dramm nozzles with the flexibility of a below basket hanging irrigation system. Designed for misting or irrigation of crops on benches or on the ground, the Hanging Nozzle system uses the familiar Dramm nozzles with our No Drip Extension Check Valve and a leader tube.

Hanging nozzle systems offer solutions to the traditional problems of rigid pipe mounted irrigation systems. Hanging nozzle systems use a check valve and hang below the lateral which prevents dripping from the nozzle or the ÙÙshadowÙ_ dripping from the lateral. Dramm Hanging Nozzle Assemblies offer even watering. Gravity ensures that the nozzles are plumb preventing pattern distortion.

The entire assembly includes a leader tube with a barb fitting. The system uses flexible polyethylene tubing instead of PVC for ease of use and flexibility. A variety of leader tube lengths and nozzle choices are available. For flow rates see the specific nozzles.

To install a Dramm Pin-Perfect Hanging Nozzle System. Space the nozzle assemblies at 3_Ù spacings . Choose a leader tube length that places the nozzles below the hanging baskets or at a height of at least 3_Ù above the crop. Choose a Pin-Perfect Nozzle to suit your needs taking into account the flow rate of each nozzle and the flow rate of the lateral.

48 Pin-Perfect Hanging Nozzle Assembly

180_ Nylon Nozzle

180_ spray pattern. Push into flexible 1/2 black poly tubing for perimeter watering. Use in conjunction with 90_ Nylon Nozzle.

90_ Nylon Nozzle

90_ spray pattern. Push into flexible 1/2 black poly tubing for perimeter watering. Use in conjunction with 180_ Nylon Nozzle.

No-Drip Riser

No-Drip Risers elevate Dramm Irrigation Nozzles 2 1/4 above the PVC pipeline. When pipeline water flow is shut-off, excess water falls back into the pipeline due to the height of the No-Drip Riser. This ÙÙfall backÙ_ helps control drip from nozzles overhead. No-Drip Risers can also be used to elevate Dramm Irrigation Nozzles above the soil line when pipes are buried for landscape purposes.

No-Drip Extension with Check Valve

No-Drip Risers elevate Dramm Irrigation Nozzles 2 1/4 above the PVC pipeline. When pipeline water flow is shut-off, excess water falls back into the pipeline due to the height of the No-Drip Riser. This ÙÙfall backÙ_ helps control drip from nozzles overhead. No-Drip Risers can also be used to elevate Dramm Irrigation Nozzles above the soil line when pipes are buried for landscape purposes.

Run-Out Valve

Run-Out Valves are designed to be installed at the end of 1-inch or 3/4-inch PVC pipelines. When the water is turned off, the Run-Out Valve will open and allow water to run out of the line_ eliminating drip from all overhead nozzles. Run-Out Valves require at least 15 PSI to work properly.

Use PVC cement and a 1 to 3/4 PVC reducer bushing to connect Run-Out Valves to 3/4-inch PVC pipelines. Follow the PVC cement directions regarding pipe preparation and drying times.

Threaded Pipe Nipple

The Threaded Pipe Nipple is used to attach Dramm Irrigation Nozzles directly to 1/2 PVC pipe risers. To install, simply screw the Threaded Pipe Nipple onto the threaded 1/2 PVC pipe riser. This method is ideal when you want to eliminate overhead lines or when overhead lines are impossible. 1/2 NPT X 3/8 WW . Use with 1/2 threaded PVC risers.

Slip Fit Pipe Nipple

The Slip Fit Pipe Nipple is used to attach Dramm Irrigation Nozzles directly to straight (unthreaded) 1/2 PVC pipe risers. To install, use PVC cement to attach the Slip Fit Pipe Nipple onto PVC pipe risers. Follow the PVC cement directions regarding pipe preparation and drying times. This method is ideal when you want to eliminate overhead lines or when overhead lines are impossible. 1/2 NPT X 3/8 WW . Use with 1/2 straight PVC risers.

Drill Tap 3/8 Whitworth Thread

Creates a 3/8 Whitworth thread in PVC for Pin-Perfect, Nifty or Misty Mist Nozzles.

3/4 Kwik Klamp

The Kwik Klamp is a bracket with a hinged clip that can open and close. This handy device locks shut when closed, but can be opened to remove or replace pipelines. The Kwik Klamp makes pipe installation fast and easy. Made in the Netherlands from chemical resistant polypropylene. Available for 3/4 and 1 diameter pipes. Metric and additional inch sizes are available upon special order. Use with the Kwik Spacer.

1 Kwik Klamp

3/4 Kwik Spacer

The Kwik Spacer slides into the Kwik Klamp and is used to create additional space between the pipe and wall. Multiple Kwik Spacers can be combined to create varying lengths in 3/4 increments. Made in the Netherlands from chemical resistant polypropylene. Available for 3/4 and 1 Kwik Klamps. Metric and additional inch sizes are available upon special order.

1 Kwik Spacer

On Dribble Tube

Dramm On Only Dribble Tubes have permanently attached always ON weight emitters. All On Dribble Tubes are permanently assembled. Different sizes and different lengths can be combined for price breaks.

There are three types of Dribble Tubes available: DTS with a .045 inside diameter green tube, DTM with a .060 inside diameter brown tube- and DTL with a .075 inside diameter blue tube. All 3 types are available in lengths from 12 TO 42 long. Use of Dribble Tubes allows individual pot watering for a total bench. Dramm Dribble Tubes should be used on 5, 6, or 7 pot sizes.

On Dribble Tube

Dramm Stix

Dramm StixÙ_ are designed to be used when it is impossible to run overhead water lines but the grower wants to water or mist from overhead. Very useful on moveable benching! Dramm Stix are available in 5 different heights from 10 to 36 and include the poly tubing (-which is 30 longer than the stick-), Pin Perfect nozzles, and the Dramm StixÙ©. The orange base Dramm StixsÙ© allow you to change from water nozzles to mist nozzles.

Dramm StixÙ© have a 3/8 WW thread which accommodates the Pin Perfect, Nifty, Misty Mist, and 180_ Nifty Nozzles. Dramm stix come standard with green Pin Perfect Nozzles unless specific type and color-coded nozzle are requested. Nifty Nozzles spray a 7 ft. diameter circle- while Misty Mist Nozzles cover a 4.5 ft. diameter circle. Both will completely water 100 ft. of bench or bed in about 5 minutes. Water supply tubes are inserted at 42 inch intervals in 3/4 or 1 black polyethylene pipe. Benches up to 70ft. long- use 3/4 pipe, over 70 ft. long- use 1 pipe, over 120 ft. long- use 1 pipe with supply in middle.

Dramm Stix

Dribble Ring for 6 & 7 Containers

Dramm Dribble Rings are designed for individual pot watering of larger size containers. The ring encircles the plant and water is emitted in 5 areas through 10 holes to ensure uniform watering in larger pot sizes. Dribble Rings come in 5 sizes with different length lead tubes: They are recommended for all plants in 6 & 7 containers, 8 - 10 containers, 13 containers, 16 containers, and the largest for use in 18 - 20 containers. Dramm Dribble Rings provide complete, uniform watering for large pots, B&B stock, tropical plantings and orchids.

Dribble Rings are fed with a .060 ID Tube. A maximum of 400 containers can be watered with the Dramm Dribble Rings from a 3/4 supply pipe. Minimum order 100 per size.

Dribble Ring for 6 & 7 Containers

Universal Hand Pick Tool

The Dramm Hand Pick Tool is used for the insertion of Dramm Brass Eyelets into poly tubbing for the use of Dramm Dribble Tubes and Rings. Place an eyelet onto the tip of the Handpik tool and push firmly into the black poly tubing. The Hand Pick Tool will pierce the poly tubing and insert the brass eyelet in one leak-free operation!

Brass Eyelet

Brass eyelet. Used to install Dramm Dribble Tubes and Dribble Rings.

Brass Eyelet

Brass eyelet. Used to install Dramm Dribble Tubes and Dribble Rings.

Poly Tubing -.045 ID X .100 OD

Small leader tube for Dramm Dribble Tubes.

Poly Tubing -.060 ID X .100 OD

Medium leader tube for Dramm Dribble Tubes.

Poly Tubing - .075 ID X .125 OD

Large leader tube for Dramm Dribble Tubes.

Poly Tubing - .130 ID X .192 OD

Dramm Stix leader tube.

3/4 in NPT Dramm Solenoid Valve

Dramm's ultra-durable solenoids are designed to outlast the competition and shut-off rapidly. Perfect for misting systems, where an extra second or two is more water than needed, the SVB range of solenoids are fast acting.

1 in NPT Dramm Solenoid Valve

Dramm Solenoid Valve - 1 National Pipe Thread

Polyethylene Irrigation Line

Dramm PE tubing is available in 16mm and 25mm (3/4) in various lengths. Call for sizing and pricing.

350mm HAF Fan

The Dramm AME Horizontal Air Flow (HAF) Fans offer efficiency, flexibility, and simplicity. Utilizing an aerodynamic design and a high-efficiency motor, the AME fan is equipped to maximize the air flow potential of any situation. When combined with speed controllers, the AME Fans offer unmatched flexibility in air flow as plants grow and mature. Because of their shrouded, aerodynamic design and high-efficiency motor, Air Movement Efficiency (AME) fans cover greater distances with better, more even air speeds. The AME Fan design provides leverage for air movement. The result is not only increased forward propulsion but a pull from behind the fan as well. This helps to even air speeds by creating momentum throughout the house. The result is fewer fans needed and an increase in efficacy and reduction in electrical costs.

The Dramm AME Horizontal Air Flow System performs best when sized to fit a particular situation. Dramm technical personnel take into account many different variables in each greenhouse before designing a customized layout. To have a layout prepared for your greenhouse please contact your Dramm Technical Representative. The AME fans and Controllers can be connected to an external climate control computer for automated speed regulation. For more information, please refer to this document.

400mm HAF Fan

5 AMP AME Fan Controller

The Dramm PS-05 Variable Power Station offers control without computer inputs. This lower cost version of our controller range provides speed control by use of the knob only.

6 AMP AME Fan Controller

The Dramm AME Variable Power-Station is designed to provide precise control in a variety of applications. The analog Power-Station can be used for controlling variable-speed single-phase fans, electrical heating, bulb or tube lights, cooling systems or other electrical devices. The Power-Station regulates the voltage to the electronic device. When used with AME variable-speed fans, the Variable Power-Station controls the voltage supplied to the fan, varying the speed of the fan.

The Variable Power-Station can be used as a manual controller or with other control systems. Additionally, the Power-Station is protected against extreme electrical fluctuations.The Power-Station is also provided with an alarm output that will trigger as a result of power failure, etc. and will automatically switch to the manual setting to keep fans running. An analog input (2-10vDC or 4-20mAmp) is included and can regulate the speed or turn off the controller using a signal input from a climate controller.

10 AMP AME Fan Controller

The Dramm AME Variable Power-Station is designed to provide precise control in a variety of applications. The analog Power-Station can be used for controlling variable-speed single-phase fans, electrical heating, bulb or tube lights, cooling systems or other electrical devices. The Power-Station regulates the voltage to the electronic device. When used with AME variable-speed fans, the Variable Power-Station controls the voltage supplied to the fan, varying the speed of the fan.

The Variable Power-Station can be used as a manual controller or with other control systems. Additionally, the Power-Station is protected against extreme electrical fluctuations.The Power-Station is also provided with an alarm output that will trigger as a result of power failure, etc. and will automatically switch to the manual setting to keep fans running. An analog input (2-10vDC or 4-20mAmp) is included and can regulate the speed or turn off the controller using a signal input from a climate controller.

20 AMP AME Fan Controller

The Dramm AME Variable Power-Station is designed to provide precise control in a variety of applications. The analog Power-Station can be used for controlling variable-speed single-phase fans, electrical heating, bulb or tube lights, cooling systems or other electrical devices. The Power-Station regulates the voltage to the electronic device. When used with AME variable-speed fans, the Variable Power-Station controls the voltage supplied to the fan, varying the speed of the fan.

The Variable Power-Station can be used as a manual controller or with other control systems. Additionally, the Power-Station is protected against extreme electrical fluctuations.The Power-Station is also provided with an alarm output that will trigger as a result of power failure, etc. and will automatically switch to the manual setting to keep fans running. An analog input (2-10vDC or 4-20mAmp) is included and can regulate the speed or turn off the controller using a signal input from a climate controller.

AME Fan Hanging Instructions

Document that shows hanging instructions and dimensions for AME fans.

Single Stage Thermostat

The Dramm Microfan mechanical thermostats are designed with rough environments in mind. These high quality thermostats are perfect for any situation where harsh conditions may damage less durable equipment. Protected in sealed PVC housings, these thermostats offer stainless steel coiled sensors and accuracy to 1_ C. The SPDT (Single Pole Double Throw) switch contact (one set of contacts open on temperature rise as the other set closes) is a no load contact and offers superior accuracy.

Designed to be placed in the area to be controlled, the Dramm Microfan Thermostats are perfect for heating, cooling, and ventilation control in greenhouses, factory buildings, warehouses, farms or anywhere requiring accuracy in control.

Two different thermostats are available: the T41-SV Single-Stage and the T42-SV Double-Stage Thermostat. Both are CSA approved and available in Canada.

Two Stage Thermostat

Mini AutoFog™

Treats up to 5,000 sq ft alone or up to 7,000 sq ft with HAF fans. Perfect for individual greenhouses, quonset huts and smaller areas. More than one can be used together for larger areas and separated for smaller areas.

Autofog™

Treats 12,000 square feet . Treats 26,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use

.

Large AutoFog™

Treats 30,000 square feet. Treats 70,000 square feet with additional fans . Fogger head separates from control & compressor carriage for portable use. 240 Volts 60HZ, single phase

Air Kit for SLVH and LVH

The Autofog AirKit is used to connect a fogger head to a customer supplied air compressor and includes a 24v solenoid, an air filte and regulator. The AirKit allows a user to mount their fogger head permanently in the greenhouse. Requires separate control, such as a a climate control computer.

Stainless Steel Nozzle for MLVH and SLVH Autofog

For the application of corrosive chemicals with the Autofog. Replaces the standard brass nozzle. Available for all Autofog sizes.

Stainless Steel Nozzle for LVH and DLVH Autofog

Autofog Annual Maintenance Kit

The Autofog Annual Maintenance Kit includes a collection of components that should be replaced on the Autofog units annually. The kit includes O-Rings and a replacement solution line for the nozzle, an air filter for the compressor and easy to use instructions on how to replace each part as well as calibrate your Autofog nozzle for the next season. Please specify the model when ordering. (ML, SL or LV)

Coldfogger™ 20 gallon

The CFAR-20/150 Coldfogger is a low-volume chemical applicator that can easily apply all formulations of pesticides, growth regulators fungicides, vaccines, cleaning products and disinfectants using a highly concentrated spray solution. The low-volume method of applying chemical solutions diminishes costly run-off and greatly reduces application times. Very small droplets are generated to provide deep and even penetration of chemicals.

The large tank holds enough spray solution to provide up to 70,000 sq. ft. of coverage in as little as 70 minutes. The powerful high pressure fog projects a plume of 30-60 micron diameter spray droplets 20 - 25 feet from th e hand held spray gun. The quality of spray is a tremendous improvement over conventional hydraulic sprayers that produce droplets that vary in size from 100 - 400 microns. Includes 150 feet of High Pressure Hose and can come with the standard solid rubber tires or the BigFoot pneumatic wheel kit.

Coldfogger™ 50 gallon

The 50 galllon Coldfogger can treat up to 200,000 with one tankload of solution. The CFAR-50 is available with 150' or 300' of high pressure hose and can come with either solid rubber wheels or the BigFoot pneumatic wheel option.

Bigfoot Upgrade

The Bigfoot upgrade replaces the Coldfogger's solid rubber wheels and casters with 15 pneumatic wheels and pneumatic casters. This is available on both the CFAR-20 and CFAR-50 versions.

150 Foot High Pressure Hose

3,000 psi rated hose for Coldfogger units.

300 Foot High Pressure Hose

3,000 psi rated hose for Coldfogger units.

K-30/O Portable Livestock PulsFOG®

For livestock or outdoor use. For use with oil-based formulations. Fogs 10 liters in 15 minutes. Propels fog up to 220 feet.

K-30 Large BIO PulsFOG® Dual Start

The Dual Start K-30/20 BIO offers both the Manual Priming Ball and a Push-button, compressor-driven starting mechanism for easier starting

K-30 Dual Start Conversion Kit

Convert any K-30/20 to Dual Start. Kit includes instructions for installation. Dramm can also upgrade your unit if sent in for repair

PulsFOG Accessories

Carrier Solution

Use of the PulsFOG requires a carrier solution to help reduce surface tension and create evenly sized droplets. There are three solutions available. For most horticultural applications, NutriFOG is the preferred carrier. VK-I and VK-II are also available. NutriFog and VK-II are for all chemical formulations and mixed with water. VK-I is for EC chemicals only and is NOT to be mixed with water. For SDS Sheets, click on the MANUAL Link Below.

Turbair Electrafan

__Targeted Low Volume __Perfect for spot treatment __Lightweight, portable machine __12 v DC __50-60_µ VMD __Covers distances from 10-20 feet

The Turbair Electrafan (TEF) is an air assisted spinning disc sprayer for low and ultra-low volume application of insecticides and fungicides in situations with no natural air movement, e.g. indoors.

The Electrafan 110 is powered by an A/C electric motor of 110 volts (60hz) and uses a suitable extension cable which allows treatments up to 200 ft. from a power source. The Electrafan 110 can efficiently apply water-based mixtures at both low volumes (normally 8 to 16 liters/acre) and ultra-low volume (ULV) formulations.

The Electrafan can be used in glasshouses and polytunnels for the treatment of crops, for pest control in buildings, insect control in animal houses and for applying vaccines to poultry.

ULVA+

__ Lightweight __ Easy to Use __ Variable Flow Rate __ Charge lasts 40 hours __ Powered by 4_ D Cell Batteries

The ULVA+ is a rotary disk atomizer that applies chemicals evenly both indoors and outdoors. It is designed for use in areas where there is natural air movement. The ULVA+ is perfect for outdoor row crops as well as cut flowers. The ULVA+ produces 50-60_µ droplets that drift on air currents as they drop, providing even coverage on all plant surfaces.

The one liter bottle can treat up to 6,000 square feet with one fill. The ULVA+ uses 4 D cell batteries. Complete with batteries & recharger.

Microfit Herbi Standard Lance

6V DC (4-D cell/R20 batteries) Over 40 hours spraying 4 Ft. band width 200-300_µ (microns) Droplet size Lightweight, portable machine __Powerpack is interchangeable with Microfit lances

The Microfit Herbi, part of the modular Microfit system, is a spinning disc sprayer for the Controlled Droplet Application (CDA) of herbicides and other chemicals. It can apply CDA formulations or traditional water-based products at total spray volumes of only 5-20 liters/acre. The consistently large spray droplets, of around 250_µ (microns), minimize the risk of spray drift and fall in a precise 4 ft. wide circular spray pattern. Herbaflex and Herbi-Twin attachments are available for narrower or wider band widths.

The Herbi is used worldwide for band spraying and can treat several acres in one hour. Uses include general clean-up, border, pathway, or strip spraying, and spraying of larger areas by making consecutive spray passes. The reduction in mixing and filling operations offers operator safety advantages.

Microfit Herbi Flex Lance

The Herbiflex lance sprays a 4 - 20 inch bans spray that is directable. An optional spray shield is available to protect desired plantings.

Microfit Herbi Twin Lance

5.5 - 7.5 Ft. band width Lightweight, portable machine Powerpack is interchangeable with Microfit lances

The Microfit Herbi-Twin, part of the modular Microfit system, is a twin-headed, spinning disc sprayer for the Controlled Droplet Application (CDA) of herbicides and other chemicals. The Herbi-Twin greatly reduces time by doubling the area covered per pass. The twin disks create an adjustable band width of 5.5 - 7.5 ft. for maximum dispersal of chemical.

The Herbi-Twin is used for wide band spraying. Uses include pathway or strip spraying (e.g. in orchards and plantations,) and spraying of larger areas by making consecutive spray passes. The reduction in mixing and filling operations (with no mixing required for CDA formulation) offers operator safety advantages. Optional Herbaflex and Herbi lances available.

The Microfit Herbi-twin is a low volume sprayer that has a high work rate and is very economical.

MSO Pro Sprayer Package

Upgrades the MS20-100 to include a separate agitation system and pressure gauge for better spray accuracy. MSO Pro is available with the standard or BigFoot wheel package.

Herbi Power Pak (with bottle)

Herbi Power Pak with bottle.

Herbi Microfit Standard Lance

Standard Herbi Microfit Lance.

Herbi Microfit Flex lance

Herbi Microfit Flex lance.

Herbi Microfit Twin Lance

Herbi Microfit Twin Lance.

5 Liter Backpack

5 Liter Backpack for Microfit Herbiflex sprayers.

Herbaflex Spray Shield

Herbaflex Spray Shield.

MSO - Heavy Duty Sprayer

Fully adjustable pressure- up to 500PSI Adjustable spray pattern & output rates 33' Discharge hose Optional cart Solid bronze pump construction with oiless bearings Durable metal housing 120V AC

The Dramm Heavy-Duty sprayer is powerful and compact- designed for every type of chemical application. Model MSO is a hydraulic sprayer with fully adjustable pressures, making it a highly flexible tool for the application of pesticides, fungicides, wetting agents, cleaning solutions and disinfectants. By simply twisting the spray gun knob you can adjust the pressure from a stream that throws up to 20 feet to an eight foot diameter mist.

Gasoline Power Sprayer

2-Stroke Engine. Dual Piston Pump with Uniflow Design Minimizes Pump Wear. Bronze & Stainless Steel Pump Construction Adjustable Trigger Spray Gun Oe,Three Pressure Regulator Settings,66 ftÙ Discharge Hose Optional 100ftÙ Hose Available Oe,12 Gallon Aluminum Cart

The Dramm MS-Gas sprayer is powerful and compact- designed for every type of chemical application. Powered by a 2-stroke engine for reliability. Model MSO GAS is a hydraulic sprayer with fully adjustable pressures, up to 350psi making it a highly flexible tool for the application of pesticides, fungicides, wetting agents, cleaning solutions and disinfectants. By simply twisting the spray gun knob you can adjust the pressure from a stream that throws up to 20 feet to an eight foot diameter mist.

Gasoline Power Sprayer

Includes 66' Discharge Hose Trigger-Style Gun and Suction Hose Sprayer Cart and 20 Gallon Tank.

MSO Sprayer 100' Package

Includes the MSO Sprayer on our MS-20E Cart with 100' of hose and a reel.

Bigfoot Upgrade

Add the Bigfoot upgrade to any MS or HYDRA sprayer for more rough terrain. The Bigfoot upgrade replaces the solid rubber wheels and casters with 15 pneumatic wheels and pneumatic casters. Works with the MSO, MSGAS, Chemdose 120, Ferticart, Watercart, Foamer and the HYDRA line of sprayers.

MSO Sprayer 33' Package

Includes the MSO Sprayer with 33' hose on our MS-20E Cart. NOTE: THIS PACKAGE DOES NOT INCLUDE THE REEL.

BlueFlex Spray Hose 33'

BlueFlex 1/4 DIA. Durable, Flexible Spray Hose - 33'. For MSO and MS-Gas Sprayers

BlueFlex Spray Hose 100'

BlueFlex 1/4 DIA. Durable, Flexible Spray Hose - 100' For MSO and MS-Gas Sprayers

Trigger-Style Spray Gun

Adjustable Output with On/Off Trigger for MSO, CS-5AGS or MS-GAS

Nozzle Orifice for MS-TG Spray Gun

Nozzle tip for MS-TG Spray Gun. Replace regularly for best results.

Nozzle Core for MS-TG Spray Gun

Diffuser for MS-TG Spray Gun. Replace regularly for best results.

MSO Pressure Gauge Kit

Upgrade your MSO with a gauge for more precise measurement of pressure. Kit includes fittings and T and is meant to be placed on the pressure output of the pump, before the hose.

Chemdose™ 2

The CD-2 is a portable, hose-end unit that connects to either an injector or hydraulic sprayer below 75 psi. This eliminates problems with hose length and power.

ChemDose™

The CD-120 Chemdose is a cart mounted precision dosing system. With a 20 gallon tank, an 18 width and a rechargeable battery, the CD-120 is very portable. Includes 3 different wand lengths.

ChemDose without cart

Includes 3 Different Wands: On Bench, Floor, & Hanging Basket; Charger and 25' Hose

Hydrosensitive Paper

Dramm's Hydrosensitive Paper turns blue when it comes into contact with water or oil. Very useful for showing the deposit of spray particles and for training new applicators.

Pick-Up Stix

Jumbo tweezer tool for liter pick up. Aluminum and plated steel with comfort grip.

Hanging Basket Remover

Comes with 10 in diameter ring and 36 rod to conveniently remove hanging baskets from hard-to-reach areas above! Rings also available for 8 or 12 inch pots. Rod also available in 60 in or 84 in lengths.

8 in dia Hanging Basket Remover Ring

Hanging Basket Remover Ring 8 in diameter only

Hydra Sprayer - 50 gallon

Years of experience have culminated in Dramm's Hydra Sprayer line. The Hydra offers larger hose lengths, greater flow rates and larger tanks. The Hydra line is easy-to-use with features such as a convex reel to prevent birdnesting and a specialized agitation system to keep even stubborn powders in suspension.

Hydra Sprayer - 50 gallon - Corrosion Resistant Fittings

Upgrade to corrosion resistant fittings for the Hydra 50 gallon sprayer.

Hydra SprayTrax - 50 Gallon

The 50 gallon Hydra SprayTrax is available in either gasoline or electric. The unit comes with a variety of hose lengths (150', 200' 250') on a variable tension drag, locking reel. The SprayTrax cart is designed for maximum manueverability with tracking axles that both turn. The SprayTrax can turn 360˚ within 7'. The HydraSprayTrax is available with either an electric motor or a 5.5 HP Honda gasoline motor.

Hydra SprayTrax - 100 Gallon

The 100 gallon Hydra SprayTrax is available as either gasoline or electric. Electric start option is available on the Honda 5.5HP engine. The larger platform allows for additional reel options cantilevered off the rear of the unit.

Hydra 200 G - 200 Gallon Sprayer

The Hydra200G is available as either gasoline or electric. The large platform allows for up to two reels (gas only) and a second, smaller tank for smaller jobs. Click for more information.

Spraytrax Electricwind

The Dramm Electricwind for the Hydra Spraytrax 100 offers push button winding of the spray hose at a variable rate of speed.

Spraytrax RemoteWind

Hydra Trigger Gun

Adjustable Output for Hydra Sprayers. Adjusts from a straight stream to a fine cone with an easy to use lever. Comes standard with the Hydra line of sprayer. Various nozzle tips are available.

1.0 mm Nozzle Tip

For Hydra Trigger Gun

Drench Adaptor for Hydra Sprayer

The Dramm Drench Adaptor works with the Hydra line of sprayers to offer drenching capabilities with a familiar tool. Consisting of a 24 Aluminum Handi-Reach Handle, a 170AL Water Breaker Nozzle, a Dramm 300 Brass Shut-Off Valve and a male, stainless steel quick connect, the Drench Adaptor allows a quick switch to drenching from spraying.

Adjustable Stainless Steel Spray Gun

For Hydra Sprayers

MD-9 Specifications

The optional MD-9 gun can be paired with a variety of nozzles for different flow rates.

Hose Capacity

Each Dramm spray hose can hold specific volumes of solution. This information is useful to know when flushing the hose or switching between chemicals.

Extension Lance

5 jet spray lance with a ring for MSO, CS-5AGS, MS-GAS, Hydra (male stainless steel quick connect required) or BP-4. Compressed 28 in, extends to 41 in.

Extension Lance with Male Quick Connect

The L-5 Lance with the 220300 Male Stainless Quick Connect for easy use with the MSO or Hydra Sprayers. Compressed 28 in, extends to 41 in.

Female Stainless Steel Quick Connect

Female Stainless Steel Water Stop Quick Connect for pressures up to 3,000 psi

Male Stainless Steel Quick Connect

Male Stainless Steel Water Stop Quick Connect for pressures up to 3,000 psi

BlueFlex Spray Hose 150'

BlueFlex 1/4 DIA. Durable, Flexible Spray Hose - 150' For HYDRA, MSO and MS-Gas Sprayers

BlueFlex Spray Hose 200'

BlueFlex 3/8 DIA. Durable, Flexible Spray Hose - 200' For Hydra Sprayers

BlueFlex Spray Hose 250'

BlueFlex 3/8 DIA. Durable, Flexible Spray Hose - 250' For Hydra Sprayers

Valve Station

Dramm offers preassembled valve stations as well as multi line manifolds. Build with easy maintenance in mind, Dramm pre assembled PVC components make irrigation system installation easy. Talk to Dramm about designing your irrigation system today and include Dramm pre assembled system components.

Battery Operated Backpack Sprayer - DISCONTINUED

The Standard BP-4 has been discontinued in favor of the BP-4Li. For parts, contact our parts & service department.

FMST100 SprayTrax Foamer 100 gallon

Foamer on 100 gallon SprayTrax Cart. The FMST100 comes with a 25' hose standard, but can use up to 75' with 5 CFM @ 60 psi.

50 ft x 5/8in Hose

50 ft x 5/8in Hose for Larger Dramm Foamers

75 ft x 3/4in Hose

75 ft x 3/4in Hose for Larger Dramm Foamers - Requires more than 5 CFM to operate.

TracFOG PTO Driven Fast Fogger 400 AutoValve

The TracFOG PTO driven fast fogger is a tractor mounted fogger that creates ultra-fine particles and propells them hundreds of feet. The TracFOG400 has a 400 liter (100 gallon) tank and two directable nozzles. The new Autovalve version includes solenoids to control each nozzle as well as a pneumatic directional reversal.

TracFOG PTO Driven Fast Fogger 400 Greenhouse Vegetable

The TracFOG 400GV is like the standard unit but with much taller nozzle masts allowing the nozzles to be aimed above greenhouse vegetable crops. The GV unit does not have the automatic nozzle system.

TracFOG PTO Driven Fast Fogger 100 Autovalve

The TracFOG 100 has all of the features of the larger 400 but with a smaller tank. The 100 liter (25 gallon) tank can treat up to 500,000 square feet when full.

TracFOG PTO Driven Fast Fogger 100 Greenhouse Vegetable

The TracFOG 100 has all of the features of the larger 400 but with a smaller tank. The 100 liter (25 gallon) tank can treat up to 500,000 square feet when full. The TF100GV has taller booms to be able to reach above tall vine crops.

TracFOG Single Nozzle Extension

The TracFOG nozzle extensions attach to the nozzle base to extend the length of the nozzle by 24. This allows for the nozzle outlet to be placed closer to openings in doorways for fogging of difficult areas for tractors to enter.

PolyRail 16mm Aluminum Extrusion

PolyRail aluminum extrusion tightly sleeves PE tubing keeping it rigid, without sags. PolyRail keeps nozzles straight and even, ensuring the best coverage for your irrigation system. Installs easily without glue.

PolyRail 25mm Aluminum Extrusion

25mm (3/4) diameter. For higher flow and more support. 25mm PolyRail may be used to hang baskets

PolyRail Connecting Band

Connecting band with set screws. 4 length. Connects two rail pieces together.

PolyRail Connecting Band

Connecting band with set screws. 14 length. Connects two rail pieces together.

PolyRail 90 deg Hanger 16mm

Hanger to position PE outlet at a 90_ angle

PolyRail 90 deg Hanger 25mm

Hanger to position PE outlet at a 90_ angle

PolyRail Top Hanger

Hanger rides on Rail to position PE outlet towards the bottom of the Rail.

PolyRail Stop

Stop used at both ends of each irrigation run. Includes set screw.

PolyRail Punch 25mm

Punch for centering 3mm hole in PE.

PolyRail Punch 16mm

Punch for centering 3mm hole in PE.

PolyRail Bench Riser Base

Base for PolyRail Bench Riser Support

PolyRail Bench Riser Cap

Cap for top of PolyRail Bench Riser Support

Ferticart 20 gallon

20 gallon Injector cart with corrosion free vinyl dipped cart for Dosatron injectors

Ferticart 20 gallon

20 gallon Injector cart with corrosion free vinyl dipped cart for Dosmatic injectors

Ferticart 3 - 7 gallon

The FC3X7 offers three separate 7 gallon tanks, plumbed to allow easy switching between different solutions.

Watercart 20 gallon

20 gallon cart with battery operated pump for portable watering. Pumps 300 gallons before a recharge is needed.

Watercart 50 gallon

50 gallon cart with battery operated pump for portable watering. Pumps 300 gallons before a recharge is needed.

Ferticart 100 Gallon with Agitation

The FCST100-A Ferticart offers battery operated agitation in a larger format. Battery lasts from 8-12 hours with normal use. Versions available to fit the Dosatron D45 and D8R range of injectors.

Aeration/Agitation Bucket

The Aeration/Agitation Bucket keeps various solutions in suspension with or without aeration. Perfect for fertilizers, insecticides, fungicides, PGRs and nematodes

Cordset for 12v Operation of AAB120V

For use with the AAB120V Aeration Bucket. Replaces the 120v transformer included with the AAB120V and connects to a 12VDC battery (not included) to convert to bucket to battery power. For use with customer provided 12VDC battery of any size to allow for use uncorded.

Ferticart 50 Gallon with Aeration/Agitation for the D40 Injector

The FC50-A-D40 offers 50 gallons of stock solution and larger plumbing for use with the D40 Dosatron injector for up to 40 gpm. The FC50-A has AC powered agitation using our specilized agitation bar and a 5 gpm pump. Finally, the Ferticart has air injection to aerate to stock solution to help keep nematodes happy as they wait for application.

Ferticart 50 Gallon with Aeration/Agitation for the D45 Injector

The FC50-A-D45 offers 50 gallons of stock solution and larger plumbing for use with the D45 Dosatron injector for up to 20 gpm. The FC50-A has AC powered agitation using our specilized agitation bar and a 5 gpm pump. Finally, the Ferticart has air injection to aerate to stock solution to help keep nematodes happy as they wait for application.

White JetRain Barbed

JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For propagation mist. Alternate with Blue for best results.

Blue JetRain Barbed

JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For propagation mist. Alternate with White for best results.

Red JetRain Barbed

JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For mist and irrigation.

Yellow JetRain Barbed

JetRain Nozzle Low Pressure with Clean Out Check Valve Barbed Inlet. For heavier irrigation.

JetRain Barbed Nozzle

JetRain Nozzle Barbed with no Check Valve Barbed Inlet

White JetRain Threaded

JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For propagation mist. Alternate with Blue for best results.

Blue JetRain Threaded

JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For propagation mist. Alternate with White for best results.

Red JetRain Threaded

JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For mist and irrigation.

Yellow JetRain Threaded

JetRain Nozzle Low Pressure with Clean Out Check Valve Threaded Inlet. For heavier irrigation.

JetRain Threaded Nozzle

JetRain Nozzle Threaded with no Check Valve Threaded Inlet

JetRain 180 deg Nozzle Complete Barbed

JetRain 180 deg Pattern Barbed - Choose a color

JetRain Replacement Pin (specify color)

Replacement pin are specific to each nozzle. Please specify color when ordering.

JetRain Cleanout ADV Barbed LP

Check valve for JetRain nozzle with cleanout. 15-50 psi.

JetRain Cleanout ADV Threaded LP

Check valve for JetRain nozzle with cleanout. 15-50 psi.

JetRain Greenhouse Manual

Jet Rain installation and care manual.

JetRain On/Off Valve

Add to a JetRain assembly to turn individual nozzles on and off.

JetFog Barbed Nozzle

The JefFog nozzle offers a very fine spray (80 micron) between 50-70 psi. Available in a barbed or threaded inlet with single or multiple outlets. Flow per tip is 5.8 lph (1.5 gph).

JetFog Threaded Nozzle

The JefFog nozzle offers a very fine spray (80 micron) between 50-70 psi. Available in a barbed or threaded inlet with single or multiple outlets. Flow per tip is 5.8 lph (1.5 gph).

JetFog 2 way Barbed

Two outlet nozzle with barbed inlet. Flow rate is 11.6 lph (3 gph).

JetFog 4 way Barbed

Four outlet nozzle with barbed inlet. Flow rate is 23.2 lph (6 gph).

JetFog 5 way Barbed

Five outlet nozzle with barbed inlet. Flow rate is 29 lph (7.5 gph).

JetFog 4 way Threaded

Four outlet nozzle with threaded inlet. Flow rate is 23.2 lph (6 gph).

JetFog 5 way Threaded

Five outlet nozzle with threaded inlet. Flow rate is 29 lph (7.5 gph).

JetFog Greenhouse Manual

Installation and care manual for JetFog nozzles.

Replacement Nozzle for JetFog

Replacement nozzle tip for JetFog nozzle. Press-fit connection.

Blank Nozzle for JetFog

Blank nozzle tip to prevent spray from any JetFog outlet. Press-fit connection.

2 way cross for JetFog

Two way cross for JetFog Nozzle. Press fit connection.

4 way cross for JetFog

Four way cross for JetFog Nozzle. Press fit connection.

Replacement ADV Diaphragm for JetFog

Replacement diaphragm for JetFog Anti Drip Device. Silicone. Use JF-WRENCH-C to access diaphragm and reseat new diaphragm.

JetFOG Nozzle Service Kit

Includes JF-WRENCH & BLANK tool, 10 BLANK6, 5 JF-525, 3 JF-524, 5 JF-560

JetFOG Wrench Tool w/ JetFOG Seat Tool

Combo set for disassembling and reassembling JetFOG nozzles easily.

ii ri Smart Controller w Coil

The ii ri Smart Controller is a a battery operated, Bluetooth Connected, irrigation/misting controller that can oprate one solenoid valve without wiring.

Create different programs on your smartphone and upload them to your ii ri easily to change scenarios. Great for quick installations, single propagation benches, outdoor mum fields and more.

ii ri Smart Controller on 3/4 in. Solenoid

Ii ri Smart Controller including 3/4 solenoid valve.

MistTime Misting Controller

The Dramm MistTime Controller is perfect for time or temperature based control of misting valves. With the ability to program each valve independently, the MistTime offers unmatched flexibility. Each valve is operated on a cycle. The timing is variable with the duration operating between 1 second and 60 minutes and the interval time operating between 1 minute and 12 hours. Each valve can be run continuously, between specific times, or even started when the temperature rises above a set point. With the ability to program each valve independently, the controller can operate as a time based mist controller, a pulse-irrigation controller and a mist cooling controller at the same time. In addition, the MistTime offers the option to convert the last valve output to a pump pre-start output. When configured in this manner, the operator is given an option to pre-start a pump prior to any valve operation. The pre-start time is variable. This ensures that the system is properly pressurized when the mist system is in operation. The MistTime is easy to program using a keypad to navigate the menu and enter amounts. For flexibility, the MistTime can be programmed in English, Spanish, French or Dutch. The MistTime operates on 120vAC or 220vAC and includes a 24vAC output. The unit is enclosed in a NEMA 4 rated PVC housing and is easy to wire and install.

MistTime Manual in Spanish

The MistTime is programmable in English, Spanish, French and Dutch. This manual offers native language support.

ProLine Irrigation Controller - 4 Station (expandable)

The ProLine Irrigation Controller offers advanced control features such as multiple program operation, master valve, multiple start times per day, manual operation, and an option to add cellular connectivity to monitor and modify irrigation operation from your phone.

ProLine Quick Start Guide

Quick Start Guide for the ProLine Controller. Step-by-step instructions to program the basics.

ProLine Installation Guide

Easy instructions showing how to install your ProLine Controller.

ProLine Irrigation Controller - 8 Station (expandable)

RainPro Manual

The RainPro has been discontinued. The manual remains on line for previous customers.

RainPro 4 Output Expansion Module

The RainPro has been discontinued. However, we still have 4 output modules to upgrade existing units. This module fits into open slots in the RainPro 03, 07 and 11 version to add 4 outputs to increase the capacity of the unit.

ColorStorm™ Professional Rubber Hose

ColorStorm™ Hose 5/8 in 50 ft

Nickel Plated, Machined Brass Hose Fittings for ColorStorm™ Hose

Male 5/8 Nickel Plated Brass Fitting

Female 5/8 Nickel Plated Brass Fitting

Male 3/4 Nickel Plated Brass Fitting

Female 3/4 Nickel Plated Brass Fitting

5/8 Ferrule - brass

3/4 Ferrule - brass

DrammPress Frame

The DrammPress fits Dramm ColorStorm hose with our professional fittings by hand or using a cordless drill. The Dramm Crimper can be fitted with either 5/8 or 3/4 jaws (sold separately). Works with all Dramm ColorStorm fittings and ferrules.

DrammPress 5/8 Jaws

Choose either jaw size to fit Dramm ColorStorm hoses. Either jaw fits the DrammPress (sold separately).

How to use the DrammPress

Fitting/Ferrule Set 5/8 in Male 12 pk

Fitting and Ferrule set for use with the DrammPress Hose Crimper and ColorStorm Hose

Fitting/Ferrule Set 5/8 in Female 12 pk

Fitting/Ferrule Set 3/4 in Male 12 pk

Fitting/Ferrule Set 3/4 in Female 12 pk

Splice/Ferrule Set 5/8 in 12 pk

Dramm Heavy-Duty Hose Reel

The Heavy-Duty Hose Reel provides durable hose management without kinks or twists. Easy to wind and unwind, the reel comes with an adjustable brake to prevent freewheeling and convex sides that prevents pinching against the sides of the reel. A rigid mount and stainless steel axle ensure that there is no flexing or bouncing under the weight of the hose filled with water.

Heavy-Duty Hose Guide

The galvanized steel hose guide provides easy hose management, keeping hoses in the aisle and preventing them from knocking over plants. The 6 nylon roller eases hose pulling by reducing resistance.

2 lph Drip Assembly - 18 in.

2 lph Drip Assembly - 24 in.

2 lph (1/2 gph) Pressure Compensated Emitter Barbed - Black Insert

2 liter per hour emitter with barbed outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

4 lph (1 gph) Pressure Compensated Emitter PressFit - Green Insert

4 liter per hour emitter with barbed outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

4 lph (1 gph) Pressure Compensated Emitter Barbed - Green Insert

4 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

8 lph (2 gph) Pressure Compensated Emiiter PressFit - Red Insert

8 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

12 lph (3 gph) Pressure Compensated Emitter PressFit - Black Insert

12 liter per hour emitter with barrel outlet for attaching to 0.191 tubing. Offering even flow rates at variable pressures, PCAS emitters provide even water from the first to the last dripper. Our LARGER emitter body allows for a wider labyrinth that prevents clogging by letting debris pass through the emitter.

Barrel to barb Adaptor

Connect barrel outlet emitters to 192 tubing with this adaptor.

2 Way Manifold

Dramm 2 and 4 Way Manifolds are for use with the MB 4LPH and 8LPH emitters. The Manifolds allow multiple pots to be watered from one emitter.

4 Way Manifold

Dramm 2 and 4 Way Manifolds are for use with the MB 4LPH and 8LPH emitters. The Manifolds allow multiple pots to be watered from one emitter.

Slim Weight - Zinc Aluminum Alloy

5 Liter Chemical Tank

For PulsFOG K-10SP

4 in. dia Pressure Compensated Dribble Ring

Pressure Compensated Rings offer even watering of trees and nursery stock. With a choice of 4 lph (1 gph), 8 lph (2 gph), or 12 lph (4 gph) emitters, each plant gets the same amount of water supplied by Dramm's Dribble Rings.

4 in. dia Pressure Compensated Dribble Ring

Anchor Stake for Rings

The S3ANCHOR holds dribble rings in the pot, keeping them optimally placed for best water distribution.

T connector for Dramm PC Rings.

The T-Piece has two barbed, secure connections and one smooth connection to allow for the ring to be easily disconnected.

1/4 in Microvalve

Barbed Microvalve for drip irrigation. Allows individual pressure compensated drippers to be turned off.

3mm Barbed Fitting

Barbed fitting

3mm Plug for mistakes

Plug for mistakes when using the 3mm barbed fitting.

Multi-Tool for Irrigation

Multi-tool for irrigation installation. Cuts PE, punches holes with 3,4,5 mm blades. Inserts barbed components into PE.

3mm Punch for 16mm or 1/2 Tubing

Easy-to-use 3mm Punch for 16mm or 1/2 Tubing

3mm Replacement blade for PUNCH1650

Replaces standard blade when worn.

45 deg. Angle Stake 4 in.

Plain barbed stake

45 deg. Angle Labyrinth Stake 4 in.

Labyrinth Stake

Easyloc Inline Valve

Easyloc Inline Valve 16mm x 16mm. Shuts off PE line. Insert as needed. Barb & Compression nut. Needs no additional clamp.

Easyloc Inline Valve & Fitting

Easyloc Inline Valve 16mm x 3/4in. MPT. Connect PVC to PE. Barb & Compression nut. Needs no additional clamp.

Easyloc Fitting

Easyloc Fitting 16mm x 3/4in. MPT. Connect PVC to PE. Barb & Compression nut. Needs no additional clamp.

Easyloc Tee

Easyloc Tee 16mm. Barb & Compression nut. Needs no additional clamp.

Easyloc Elbow

Easyloc Elbow 16mm. Barb & Compression nut. Needs no additional clamp.

Easyloc Coupling

Easyloc Coupling 16mm. Barb & Compression nut. Needs no additional clamp.

Figure 8 Clamp

Figure 8 clamp to close 16mm PE ends.

Floraplus 2 72 in

Floraplus 2 (1L/m2 - cap mat & PP ground cover) 72 x 100' Roll

Vivaplus 2 72 in

Vivaplus 2 (3L/m2 - cap mat & PP ground cover)) 72 x 100' Roll

Aquafol Filter Cloth 79in

Aquafol Filter Cloth - White 79 x 164' Roll

Strand Dripper 12lph - 18 in Tube

Strand Dripper 12 lph flow rate with 18 inch perforated tube.

One Touch™ Valve

The One Touch Valve offers thumb-tip control of your water flow. With 8 gpm output and a long life, the OneTouch Valve offers flexibility when watering.

OneTouch™ HighFlow Valve

The OneTouch HighFlow valve offers the same, fingertip control of your watering, but with up to 16 gpm.

HighFlow Valve

The HighFlow Valve utilizes our unique OneTouch features to increase flow, ease-of-use and connections.

Twin HighFlow Valve

The HighFlow Twin utilizes our unique OneTouch design to make spliting water flow from a hose bib easier. A swivel connection makes positioning the valve easy. Large handles make on/off simple.

HighFlow 4-way Manifold

Split a hose-bib 4 ways with one valve. Easy-to-use handles, swivel connection for simple positioning of the valve. Light blue handles for visibility of valve position.

Gauge Test Kit

Kit to test pressures in irrigation system. Includes portable gauge, 1 punch tool, 5 needles, 5 barb adaptors, 5 threaded adaptors

Gauge Needle Adaptor X Barb (5 pack)

Barbed Adaptors to test PE Line pressures

ColorWear™ Half Apron

The ColorWear Apron is great for gardening, landcaping, interiorscaping and garden center workers. A unique center mesh zippered pocket holds deadheads and yard debris, unzipping to dump. Other pockets store tools. Keeps you clean while you work.

ColorPoint™ Compact Shear

Perfect for quick cutting and deadheading. Small compact design for comfortable use. Six colors so everyone gets their color choice.

ColorPoint™ Compact Pruner

Perfect for small woody cutting. Small compact design for comfortable use. Six colors allows for personalization while pruning.

ColorPoint™ Holster

Fits Compact Shear and Pruner. Clips to belt. Leatherette base to protect blade.

ColorPoint™ Lopper

SK5 Steel, Lightweight Aluminum Handle. Comfortable rubber grips. Six colors for stylish pruning. Incredibly sharp. Replaceable blades.

ColorPoint™ Hydroponic Shear Stainless Steel

Little Buddy Hydroponic Shear with durable stainless steel blades.

ColorPoint™ Hydroponic Shear Titanium

Little Buddy Hydroponic Shear with titanium coated stainless steel blades to resist sap buildup.

Metric Female x US Male Adaptor

Metric adaptor to connect Metric to US thread.

Metric Male x US Female Adaptor

Metric adaptor to connect Metric to US thread.

Metric Brass Shut-Off Valve

Simply the best shut-off valve available. Dramm's #300 Brass Shut-Off Valve provides fingertip water control at the end of your greenhouse hose. A quarter turn of the large ergonomic handle and the water is off. Full water flow design. Made in the USA from brass, durable seals and a hard chrome plated ball to provide years of service. A raised handle clears common Geka couplings. Male and Female Metric threads.

Metric One Touch™ Valve

The OneTouch Valve offers thumb-tip control of your water flow. With 8 gpm output and a long life, the OneTouch Valve offers flexibility when watering. Male and Female Metric threads.

Metric OneTouch™ HighFlow Valve

The OneTouch Metric HighFlow valve offers the same, fingertip control of your watering, but with up to 16 gpm. Includes Metric Threads.

ColorMark Rain Wand™ Blue

Blue 40 cm Rain Wand with Black 400PL and 300M Brass Shut Off

ColorMark Rain Wand™ Rainbow

Red 60 cm Rain Wand with RedHead 1000PL and 300M Brass Shut Off

ColorMark Rain Wand™ Berry

Berry 60 cm Rain Wand with Aluminum 400AL and 300M Brass Shut Off

ColorMark Rain Wand™ Green

Green 60 cm Rain Wand with Black 400PL and 300M Brass Shut Off

ColorMark Rain Wand™ Orange

Orange 75 cm Rain Wand with Black 400PL and 300M Brass Shut Off

Handi-Grip 10 cm

Foam Grip 10 cm Handi-Grip Female Metric x Male US threads

175 micron In-Line Hose Filter - Metric Threads

The Dramm In-Line Hose Filter is for use with any Dramm hose nozzle, but highly recommended for the 1000PL Water Breaker and the 350AL Screen Aire. A stainless steel 175 micron (80 mesh) screen filters out unwanted dirt and debris.

Brass Hose Swivel - Metric

The Brass Hose Swivel is a live swivel that allows for unencumbered movement between the hose and attachements under pressure. Reduces hose twisting.

Turbo ULV 110v

The Turbo ULV 110v Targeted Cold Fogger. The TULV110 offers an adjustable output from 5-11 liters/hour and an adjustable particle size range of 10-100 µ. Depending on the output and particle size, the TULV110 can propel the fog up to 75 feet.

Turbo ULV Mixing and Use instructions

This manual describes how to use, care for and mix chemical solutions for the Dramm TurboULV Hybrid.

K-10/O Portable Livestock PulsFOG®

For livestock or outdoor. For use with oil-based formulations. Fogs 10 liters in 45 minutes.

Propels fog up to 65 feet.

K-22/O Portable Livestock PulsFOG®

For livestock or outdoor use. For use with oil-based formulations. Fogs 10 liters in 30 minutes.

Propels fog up to 120 feet.

K-30 Large Livestock PulsFOG®

For livestock or outdoor use. For use with oil-based formulations. Fogs 55 liters in 80 minutes. Propels fog up to 220 feet.

K-10 Portable PulsFOG®

For greenhouses. Fogs 10 liters in 45 minutes. Propels fog up to 65 feet.

K-22 Standard PulsFOG®

For greenhouses. Fogs 10 liters in 30 minutes. Propels fog up to 120 feet.