Irrigation and Misting Controllers

Dramm offers a variety of controllers for irrigation and misting control. From basic control to advanced features such as temperature influence, water-budget, rain sensor and pump pre-starts, Dramm's line of controllers can fit any situation.

Let Dramm Control Your Irrigation!

A complete listing of these is below. Please contact Dramm at the numbers to the left with any questions about our control products.

Dramm AutoValve


The Dramm AutoValve is a 9 volt battery operated controller that controls one valve. The AutoValve is available in a 3/4 or 1 valve body. The irrigation AutoValve can operated up to three times per day or on selected days. The misting AutoValve has all of the functions of the irrigation version, but offers a misting program as well. The AutoValves are perfect for temporary situations and for areas where no power is available.

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
GV075 3/4 in. valve Dramm AutoValve - MANUAL-

Dramm AutoValve



Dramm AutoValve - 1 inch.

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
GV100 1 in. valve Dramm AutoValve - MANUAL-

Misting AutoValve



The Dramm Misting AutoValve offers a similar program to the standard AutoValve but also offers the ability to work on a mist cycle.

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
GVM 1 or 3/4 in. valve Misting AutoValve - MANUAL-

Rain Pro EXP Controller


The RainPro EXP is an expandable, easy-to-use irrigation controller. The unit has three different irrigation programs with 4 individual start times per program. Run times can vary between 1 minute and 6 hours. A Water budget feature allows temporary modification of the run time for wet or dry days. The run times may be decreased to 10% of the programmed time or increased to as much as 150%. A rain sensor is available to increase the flexibility of the controller. The base unit controls 3 valves. The RainPro EXP is expandable to 15 valves with optional 4 output expansion modules. The RainPro EXP has a battery backup in case of power loss and is weather-tight for outdoor placement. Electrical specifications * Transformer input : 120 VAC/ 60 Hz or 220 VAC/ 50 Hz * Transformer output: 24 VAC/ 1.25 Amps * Maximum output per station .50 Amps * Maximum total output 1.0 Amps * Maximum of 3 solenoids operating simultaneously

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
RPIC-03 3 valve Rain Pro EXP Controller BROCHURE MANUAL-

Rain Pro EXP Controller



ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
RPIC-07 7 valve Rain Pro EXP Controller BROCHURE MANUAL-
RPIC-11 11 valve Rain Pro EXP Controller BROCHURE MANUAL-
RPIC-15 15 valve Rain Pro EXP Controller BROCHURE MANUAL-
RPIC-M4 4 outputs 4 Output Expansion Board BROCHURE MANUAL-
RPRS - Rain Sensor for RainPro Controller BROCHURE MANUAL-

MistTime Misting Controller


The Dramm MistTime Controller is perfect for time or temperature based control of misting valves. With the ability to pro- gram each valve independently, the MistTime offers unmatched flexibility. Each valve is operated on a cycle. The timing is variable with the on time operating between 1 and 250 seconds and the interval time operating between 1 and 250 minutes. Each valve can be run continuously, between specific times, or even started when the temperature rises above a set point. With the ability to program each valve independently, the controller can operate as both a time based mist controller and a mist cooling controller at the same time. In addition, the MistTime offers the option to convert the last valve output to a pump pre-start output. When configured in this manner, the operator is given an option to pre-start a pump prior to any valve operation. The pre-start time is variable. This ensures that the system is properly pressurized when the mist system is in operation. The MistTime is easy to program, using one knob to select the function to change and one knob to adjust the value of that function. A set button locks in any changes. The MistTime operates on 120vAc or 220vAC and includes a 24vAc transformer. The unit is enclosed in a NEMA 4 rated PVC housing and is easy to wire and install. The MistTime is available in 2 or 8 outputs. Click here to download a handy settings log.

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
MT-02 2 output MistTime Misting Controller - MANUAL-

MistTime Misting Controller



ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
MT-08 8 output MistTime Misting Controller - MANUAL-

Rain Command Irrigation Controller


The Rain Command irrigation controller is a multi-function irrigation computer which can control up to 40 separate valves. Culminating years of Dramm irrigation expertise, the Rain Command is touted to be the new standard in greenhouse irrigation control. Programming is easy with no dip switches or internal controls to fumble with. A unique feature of the Rain Command is its ability to function as both a misting controller and irrigation controller_ both at the same time.

Easy to program and use

Modular output board design for upgradability

Misting and irrigation control from the same unit

Up to 42 individual, programmable start times/day per valve

Flexibility to use advanced programming_ or simple time programming

During installation, the grower may designate certain valves as misting valves. This designation adds an interval setting to each misting valve allowing the Rain Command to operate these valves out of the normal sequence with completely variable duration and interval settings. The Rain Command is available in 8, 16, 24, 36, and 40 valve units.

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
RCM-2408 8 Valves Rain Command Irrigation Controller - MANUAL-

Rain Command Irrigation Controller



ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
RCM-2416 16 Valves Rain Command Irrigation Controller - MANUAL-
RCM-2424 24 Valves Rain Command Irrigation Controller - MANUAL-
RCM-2432 32 Valves Rain Command Irrigation Controller - MANUAL-
RCM-2440 40 Valves Rain Command Irrigation Controller - MANUAL-
RCM-08 8 outputs Valve Board for Rain Command - MANUAL-



3/4 in NPT Dramm Solenoid Valve


Dramm's ultra-durable solenoids are designed to outlast the competition and shut-off rapidly. Perfect for misting systems, where an extra second or two is more water than needed, the SVB range of solenoids are fast acting.

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
SVB075 3/4 in 3/4 in NPT Dramm Solenoid Valve - --

1 in NPT Dramm Solenoid Valve



Dramm Solenoid Valve - 1 National Pipe Thread

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
SVB100 1 in 1 in NPT Dramm Solenoid Valve - --
SVB150 1.5 in 1-1/2 in NPT Dramm Solenoid Valve - --
SVB200 2 in 2 in NPT Dramm Solenoid Valve - --



Volumetric Valve - 1 in MIPT 0.5-9 gpm


Dramm's Volumetric Valves are a perfect way to automatically shut off water to a zone once a specific flow has been achieved. Working like an egg timer, the metered valve measures flow not minutes. Instead of ringing when it reaches zero, the volumetric valve shuts off. Perfect for outdoor irrigation or anywhere that manual control is desired, but automatic shut-off is a great help.

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
MTA-125 1 in - 125 gal Volumetric Valve - 1 in MIPT 0.5-9 gpm - --

Volumetric Valve - 1 in MIPT 0.5-9 gpm



Volumetric Valve - 1 in MIPT 0.5-9 gpm

ITEM SIZE NAME BROCHURE MANUAL SHIP WT.
MTA-500 1 in - 500 gal Volumetric Valve - 1 in MIPT 0.5-9 gpm - --
MT-300 1 in - 300 gal Volumetric Valve - 1 in MIPT 2.5-22 gpm - --
MT-550 1 in - 550 gal Volumetric Valve - 1 in MIPT 2.5-22 gpm - --