PulsFOG Videos

Dramm has a variety of videos showing both operation and training.

A complete listing of our PulsFOG videos is below.

PulsFOG in Lettuce Crop
View the K-30/20 BIO PulsFOG applying a biological pesticide in a lettuce crop in Germany.
K-40 PulsFOG Operating Procedure
Learn how to operate the K-40 BIO PulsFOG.
Vinyard Frost Protection with K-30/20 PulsFOG
The PulsFOG rapidly applies a blanket of fog that can help retain heat from the earth to keep plants from freezing.
Frost Protection with K-40 PulsFOG
The K-40 PulsFOG quickly applies a blanket of fog over a crop to keep plants warmer than the surrounding air temperature, helping to prevent frost.
Cleaning a PulsFOG Barrel
Carbon will build up in the barrel of the PulsFOG as a result of the combustion used for propulsion. This carbon will choke the exhaust as it builds up, causing the machine to stop during fogging. To prevent this buildup, brush the barrel after every us
K-22 PulsFOG BIO
K-22 PulsFOG operating in a greenhouse.
PulsFOG Solution System Cleaning
The PulsFOG should be cleaned well after each use. The solution system should be cleaned by running cleaning solution through the solution lines and nozzles using the included cleaning kit and Dramm PFC solution. Remove and triple rinse the solution tank.
How to Run a K-10 PulsFOG
This quick video shows how to start and stop a K-10 PulsFOG.
Operation of K-30/20 BIO PulsFOG
An unscripted video showing a customer instructional session with the K-30/20 BIO PulsFOG.
Cleaning a PulsFOG
Cleaning a portable PulsFOG using PFC Cleaning Solution.
PulsFOG in Large Greenhouse
Running a PulsFOG K-30 in a large, European greenhouse.
PulsFOG K-22 in a hoop house
Video of a K-22 PulsFOG treating a 3000 sq ft greenhouse using only NutriFOG carrier solution.
PulsFOG Creates a True Fog
PulsFOG does not burn or volatilize the chemical solution, it atomizes it, turning it into a true, moisture-based fog.
PulsFOG in a Dairy Barn
Application of disinfectant in a dairy barn with the PulsFOG K-10.
PulsFOG Dual Start System
The Dual Start PulsFOG includes both a manual priming ball and a push-button compressor starting system. Connect to a battery for an easy start. Use the manual ball if no battery is available.
K-22 Video Training
Learn how to use the K-22 PulsFOG in this unscripted video teaching growers how to run the machine.
K-50 Basic Operation
The K-50, 275 hp thermal fogger is easy to start and extremely powerful. This video covers the basics of operation
K-50 PulsFOG Starts and Stops Easily
They K-50 PulsFOG uses a unique fuel system that allows for easy stopping and restarting of the machine without having to allow the unit to cool.


PulsFOG Videos

Dramm has a variety of videos showing both operation and training.

A complete listing of our PulsFOG videos is below.

PulsFOG in Lettuce Crop
View the K-30/20 BIO PulsFOG applying a biological pesticide in a lettuce crop in Germany.
K-40 PulsFOG Operating Procedure
Learn how to operate the K-40 BIO PulsFOG.
Vinyard Frost Protection with K-30/20 PulsFOG
The PulsFOG rapidly applies a blanket of fog that can help retain heat from the earth to keep plants from freezing.
Frost Protection with K-40 PulsFOG
The K-40 PulsFOG quickly applies a blanket of fog over a crop to keep plants warmer than the surrounding air temperature, helping to prevent frost.
Cleaning a PulsFOG Barrel
Carbon will build up in the barrel of the PulsFOG as a result of the combustion used for propulsion. This carbon will choke the exhaust as it builds up, causing the machine to stop during fogging. To prevent this buildup, brush the barrel after every us
K-22 PulsFOG BIO
K-22 PulsFOG operating in a greenhouse.
PulsFOG Solution System Cleaning
The PulsFOG should be cleaned well after each use. The solution system should be cleaned by running cleaning solution through the solution lines and nozzles using the included cleaning kit and Dramm PFC solution. Remove and triple rinse the solution tank.
How to Run a K-10 PulsFOG
This quick video shows how to start and stop a K-10 PulsFOG.
Operation of K-30/20 BIO PulsFOG
An unscripted video showing a customer instructional session with the K-30/20 BIO PulsFOG.
Cleaning a PulsFOG
Cleaning a portable PulsFOG using PFC Cleaning Solution.
PulsFOG in Large Greenhouse
Running a PulsFOG K-30 in a large, European greenhouse.
PulsFOG K-22 in a hoop house
Video of a K-22 PulsFOG treating a 3000 sq ft greenhouse using only NutriFOG carrier solution.
PulsFOG Creates a True Fog
PulsFOG does not burn or volatilize the chemical solution, it atomizes it, turning it into a true, moisture-based fog.
PulsFOG in a Dairy Barn
Application of disinfectant in a dairy barn with the PulsFOG K-10.
PulsFOG Dual Start System
The Dual Start PulsFOG includes both a manual priming ball and a push-button compressor starting system. Connect to a battery for an easy start. Use the manual ball if no battery is available.
K-22 Video Training
Learn how to use the K-22 PulsFOG in this unscripted video teaching growers how to run the machine.
K-50 Basic Operation
The K-50, 275 hp thermal fogger is easy to start and extremely powerful. This video covers the basics of operation
K-50 PulsFOG Starts and Stops Easily
They K-50 PulsFOG uses a unique fuel system that allows for easy stopping and restarting of the machine without having to allow the unit to cool.
PulsFOG in Lettuce Crop
View the K-30/20 BIO PulsFOG applying a biological pesticide in a lettuce crop in Germany.
K-40 PulsFOG Operating Procedure
Learn how to operate the K-40 BIO PulsFOG.
Vinyard Frost Protection with K-30/20 PulsFOG
The PulsFOG rapidly applies a blanket of fog that can help retain heat from the earth to keep plants from freezing.
Frost Protection with K-40 PulsFOG
The K-40 PulsFOG quickly applies a blanket of fog over a crop to keep plants warmer than the surrounding air temperature, helping to prevent frost.
Cleaning a PulsFOG Barrel
Carbon will build up in the barrel of the PulsFOG as a result of the combustion used for propulsion. This carbon will choke the exhaust as it builds up, causing the machine to stop during fogging. To prevent this buildup, brush the barrel after every us
K-22 PulsFOG BIO
K-22 PulsFOG operating in a greenhouse.
PulsFOG Solution System Cleaning
The PulsFOG should be cleaned well after each use. The solution system should be cleaned by running cleaning solution through the solution lines and nozzles using the included cleaning kit and Dramm PFC solution. Remove and triple rinse the solution tank.
How to Run a K-10 PulsFOG
This quick video shows how to start and stop a K-10 PulsFOG.
Operation of K-30/20 BIO PulsFOG
An unscripted video showing a customer instructional session with the K-30/20 BIO PulsFOG.
Cleaning a PulsFOG
Cleaning a portable PulsFOG using PFC Cleaning Solution.
PulsFOG in Large Greenhouse
Running a PulsFOG K-30 in a large, European greenhouse.
PulsFOG K-22 in a hoop house
Video of a K-22 PulsFOG treating a 3000 sq ft greenhouse using only NutriFOG carrier solution.
PulsFOG Creates a True Fog
PulsFOG does not burn or volatilize the chemical solution, it atomizes it, turning it into a true, moisture-based fog.
PulsFOG in a Dairy Barn
Application of disinfectant in a dairy barn with the PulsFOG K-10.
PulsFOG Dual Start System
The Dual Start PulsFOG includes both a manual priming ball and a push-button compressor starting system. Connect to a battery for an easy start. Use the manual ball if no battery is available.
K-22 Video Training
Learn how to use the K-22 PulsFOG in this unscripted video teaching growers how to run the machine.
K-50 Basic Operation
The K-50, 275 hp thermal fogger is easy to start and extremely powerful. This video covers the basics of operation
K-50 PulsFOG Starts and Stops Easily
They K-50 PulsFOG uses a unique fuel system that allows for easy stopping and restarting of the machine without having to allow the unit to cool.


close X

Not sure what type of sprayer you need?
Download our white paper "Selecting the Right Sprayer" to learn the right questions to ask."

Download here: